OX Tools OX Trade Hickory Handle Claw Hammer - 16oz/450g 
Timloc Universal Slate Roof Vent Pipe Adaptor Kit 
FloPlast Half Round Gutter 135° - White 
Hambleside Danelaw Double Pantile Vent TV15/2 - Slate Grey (Box of 5) 
Bond It Multi-Wipes For Hands, Tools & Surfaces - White 100 
Timco 30mm Cladding Pin - 250 Pieces 
OX Trade Claw Hammer - 20 oz 
Soudal Bathroom & Kitchen Silicone - Clear 290ml (Box of 12) 
Bond It Trowel Mastic - Black 1L 
Timco Multi-Fix Masonry Bolts, Hex Head 25pcs - 10.0 x 150mm 
Freeflow Square Gutter System Gutter 135° Angle - White 
Klober Regent Tile Vent KG6084, Dark Brown 
Leather Roofers Tool & Nail Pouch, Dark Brown 
Bond It Bitumen Primer - Black 1L 
Siroflex Trade Strength Glue Screws SF Adhesive 
ALM Code 4 Milled Lead - 510mm x 6m 
Timloc Castellated Tile Vent Red (Box of 8) 
Bond It Bitumen Primer - Black 5L 
Everbuild 701 Non-Slip Tile Adhesive – White 7.5kg 
OB41 Electrical Contact Cleaner - 400ml 
Ronseal Ultimate Finish Interior Floor Applicator Refill Pads 
Ronseal Quick Drying Stain Block - Aerosol White 
Everbuild Everflex Mirror Mate Adhesive - White 290ml Flashing Tape
Best Sellers
-
Bond It WP100 Premium Neutral Cure Oxime Silicone Sealant – EU3
From: £7.49 Incl VAT £6.24 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Cromar Bitumen Primer – Black 1 Litre
£14.79 Incl VAT £12.33 Excl VAT Add to basket -
Thompson’s Water Seal – 5L
£22.99 Incl VAT £19.16 Excl VAT Add to basket -
Everbuild 701 Non-Slip Tile Adhesive – White 3.75kg
£4.79 Incl VAT £3.99 Excl VAT Add to basket -
Soudal Genius Gun Gap Filler Expanding Foam – 600ml
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
FloPlast Half Round Gutter Union, Brown
£5.99 Incl VAT £4.99 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
