OB41 Silicone Lubricant Spray 400ml 
ALM Code 6 Milled Lead Flashing - 760mm x 3m 
FloPlast Square Line Stop End Outlet White – 114mm x 65mm 
Everbuild Jetcem Deep Rapid Repair Sand & Cement – 2kg 
Timco Metal Construction Sheet and Framing Screw 
Klober 15x9 Tile Vent - Slate Grey KG9690-0429 (Box of 10) 
Code 6 Cast Lead - 450mm x 6m 
Thompson's Water Seal - 5L 
Pinkgrip Dryfix Applicator Gun 
Klober Uni-Line Flexipipe Soil Pipe 100/100mm 4" - (KG979900) 
Lead Flexi Slate Pipe Flashing - Flat 
Bond It Heavy Duty Gun Foam Applicator 
Bond It Felt Adhesive - Black 5L 
Hambleside Danelaw TV15/4 Tile Vent - Black (Box of 5) 
Bond It Aluminium Foil Tape - 50mm x 45M 
Code 3 Cast Lead - 1000mm x 3m 
Ronseal 3 in 1 Mould Killer - 500ml 
Soudal Repair Express Cement – Beige 290ml (Box of 12) 
Soudal Compact Foam Gun PU Foam 
Hambleside Danelaw (HD DPCSPA) Tile Vent Adaptor and Flexi for TV10 Range 
ALM Code 3 Milled Lead - 450mm x 3m 
Ronseal Stays White Ultra Tough White Matt Paint - 2.5L 
ALM Code 4 Milled Lead - 390mm x 6m 
Ronseal Multi Purpose Filler Smooth Finish Powder - 2Kg 
Timco Chalk Line Set 
Chesterfelt Polyester Reinforced Shed Roofing Felt - Charcoal 10m x 1m 
Soudal Neoprene Contact Adhesive Liquid Glue 44A – 50ml 
OX Pro Brick Trowel Philadelphia Pattern - 10"/250mm 
Evo-Stik Tile & Grout Adhesives - White 3kg 
Siroflex SX Contractors LMN Silicone OAK 300ml 
ERidge Dry Fix Ridge System Black – 6m Kit 
Klober Profile-Line Twin Plain Tile Vent - Brown KG9861-0247 (Box of 10) 
Permavent Easy Slate 500 - Pack of 20 
Timco Driver and Ground Jobber Bit Set 
Code 4 Cast Lead - 360mm x 3m 
FloPlast Square Line Gutter Angle 135° White 
Everbuild Wet Rot Wood Hardener – 250ml 
Everbuild P13 Plumbers Putty - Beige 750g 
Soudal PTFE Spray - 400ml Flashing Tape
Best Sellers
-
Bond It Mould Stop – Clear 2.5L
£7.99 Incl VAT £6.66 Excl VAT Add to basket -
8 x Cromar Vent 3 Pro Breathable Membrane 1m x 50m
£399.99 Incl VAT £333.33 Excl VAT Add to basket -
ALM Code 7 Milled Lead – 390mm x 3m
£118.94 Incl VAT £99.12 Excl VAT Add to basket -
Everbuild Caulk Once – White 380ml
£7.49 Incl VAT £6.24 Excl VAT Add to basket -
Everbuild Mitre Fast Activator – 200ml
£4.99 Incl VAT £4.16 Excl VAT Read more -
Bond It Foil Safe Solvent Cleaner – Clear 1L
£7.99 Incl VAT £6.66 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
