Ronseal Stays White 2in1 Paint & Primer - Satin 2.5L 
Ronseal 3 in 1 Basecoat - White 5L 
Soudal Firecement HT, Black - 300ml (Box of 12) 
ALM Code 8 Milled Lead - 300mm x 6m 
ALM Code 7 Milled Lead - 1600mm x 3m 
Everbuild General Purpose Silicone - Brown 290ml (Box of 12) 
Freeflow 68mm Round Down Pipe Shoe - Black 
Code 7 Cast Lead - 914mm x 6m 
Bond It Contractors PVA - 25L White 
OX Pro Dry Wall Internal Corner Trowel - 102mm x 127mm 
ALM Code 3 Milled Lead - 600mm x 3m 
Everbuild Gun A Nail Standard – White 310ml 
Code 6 Cast Lead - 850mm x 6m 
Timco Timber Frame Screw - Wafer Green (6.7 x 60) Box of 50 
Soudal Swipex Wipes - 100 Wipes 
Code 5 Cast Lead - 760mm x 3m 
Everbuild Coving Adhesive & Joint Filler - White 290ml (Box of 12) 
Ronseal Exterior Multi-Purpose Smooth Finish Filler - Grey 1.2Kg 
Thompson's One Coat Waterseal - 2.5L 
IKO Shed Felt - Green 10m Roll 
Spax Phillips Ph1 Drill Bits - 25mm (Pack of 5) 
OX Pro Mini Round Point Shovel 
Everbuild Black Jack 904 Roof Felt Adhesive – 25 Litre 
Hambleside Danelaw (HD DPCSPA) Tile Vent Adaptor and Flexi for TV10 Range Flashing Tape
Best Sellers
-
Everbuild Gator Glue Adhesive – 500ml
£14.99 Incl VAT £12.49 Excl VAT Read more -
SikaMur InjectoCream-100 – White 300ml
£18.99 Incl VAT £15.83 Excl VAT Add to basket -
Estwing Roofers Pick Smooth Face Hammer – 21oz
£62.00 Incl VAT £51.67 Excl VAT Add to basket -
ALM Code 5 Milled Lead – 300mm x 6m
£130.27 Incl VAT £108.56 Excl VAT Add to basket -
Bond It Bitumen Primer – Black 5L
£22.50 Incl VAT £18.75 Excl VAT Add to basket -
FloPlast Half Round Gutter 135° – Black
£3.99 Incl VAT £3.33 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
