Everbuild Forever Clear Silicone Sealant – 295ml 
ALM Code 3 Milled Lead - 914mm x 6m 
Ronseal Exterior Multi-Purpose Smooth Finish Filler - Grey 330g 
Soudal Firecement HT, Black - 300ml 
Timco Heavy Duty Tarpaulin - 4m x 5m 
Everbuild Pinkgrip SF But It’s White – 380ml (Box of 12) 
OX Tools 12 inch / 300mm Pro Stainless Steel Plasterers Mud Pan 
ALM Code 4 Milled Lead - 800mm x 3m 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Beige - 300ml (Box of 12) 
Siroflex Trade Strength Glue Screws SF Adhesive 
OX Trade XL Cuts All Tiles Diamond Blade 
84 x Eridge Dry Fix Ridge System Black - 6M Kit 
Evo-Stik Gripfill Gap Filling Adhesive – 350ml 
Everbuild Stixall Extreme Power - Black 290ml (Box of 12) 
ALM Code 8 Milled Lead - 360mm x 6m 
Code 7 Cast Lead - 210mm x 3m 
Soudal Roof & Gutter Sealant – Black 290ml (Box of 12) 
FloPlast Half Round Union Unit - Black 
Everbuild Exact Gap Foam - 750ml 
Soudaseal Mirror Light Grey, 290ml 
Ronseal uPVC Paint - White Satin 2.5L 
Easy-Trim Over Fascia Vent - 25mm x 500mm (Box of 50) 
Siroflex Trade High Viscosity Superglue - 50g 
FloPlast Half Round Internal Stop End, Black – 112mm 
Ronseal One Coat All Surface Primer and Undercoat - White 2.5L 
ALM Code 5 Milled Lead - 1600mm x 6m 
Bond It Duct Tape - Silver 48mm x 45M 
Thompson's uPVC Restorer - 480ml 
OX Tools Pro Combination Square 300mm / 12in 
Timco Assorted Horseshoe Shims - 1.0 to 6.0mm (Box of 200) 
Code 6 Cast Lead - 850mm x 6m 
Everbuild Wood Filler Hardener / Catalyst - 40g 
Spax Pozi Pz3 Drill Bits - 25mm (Pack of 5) 
Timco FirmaHold Collated Brad A2 Stainless Steel Nails - 16G x 38mm (2000 Pieces) 
FloPlast Half Round Gutter Angle 135°, Brown – 112mm 
Code 8 Cast Lead - 210mm x 3m 
Cromar Aluminium Solar Reflective Paint – 2.5 Litre 
Ronseal Exterior Multi-Purpose Smooth Finish Filler - Grey 1.2Kg 
Spax Phillips Ph3 Drill Bits - 25mm (Pack of 5) 
OX Tools Drywall Rasp 250mm 
Oxidised Bitumen Slab - 23kg 
Estwing Roofers Pick Smooth Face Hammer - 21oz Flashing Tape
Best Sellers
-
Armatool Leather Pouch & Leather Belt
£64.98 Incl VAT £54.15 Excl VAT Add to basket -
Hambleside Danelaw TV15/7 Tile Vent – Brown (Box of 5)
£114.99 Incl VAT £95.83 Excl VAT Add to basket -
Cromar Bitumen Trowel Mastic – Black 1L
£14.94 Incl VAT £12.45 Excl VAT Add to basket -
Everbuild Everflex 335 Construction Silicone – 295ml
From: £8.99 Incl VAT £7.49 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Aluflow Gutter Deepflow Running Outlet – (RAL Colours)
£91.19 Incl VAT £75.99 Excl VAT Read more -
Hambleside Danelaw Double Plain Tile Vent, TV10/9 – Terracotta (Box of 5)
£114.99 Incl VAT £95.83 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
