Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml 
Timco Straight Tower Bolt Black 6" Gate Bolt 
Hambleside Danelaw (HD DPCA) Tile Vent Adaptor for TV10 Range 
Everbuild Everflex Premium 145 Butyl Rubber Sealant - Grey 300ml (Box of 12) 
Hambleside Danelaw Felt Lap Vent 
Freeflow 68mm Round Gutter Drain Pipe 112° Branch - Black 
Everbuild Black Jack 903 Bitumen Trowel Mastic – 2.5 Litre 
Soudal Bathroom & Kitchen Silicone - White 290ml (Box of 12) 
ALM Code 3 Milled Lead - 800mm x 6m 
OX Pro Semi Round Dutch Pin, Swivel Arm - 4 Pack 
Code 7 Cast Lead - 1600mm x 6m 
Easy-Trim Lead R Flashing Textured – 150mm x 5m 
Ronseal Precision Finish Brush - 5 Pack 
OX Pro 5 Piece Wood Chisel Set in Velcro Case 
Soudal Butyrub Non-Setting Mastic - Grey 300ml 
Restec CSM Fibreglass Roll 450g/m² - (30m² Roll) 
Permavent Plain Easy - Box of 20 
Timco Flat Wood Bit 1/4" Extension Rod - 150mm 
ALM Code 4 Milled Lead - 180mm x 6m 
OX Spectrum Contractor Diamond Blade 10mm General Purpose 300/20mm 
Everbuild Gun A Nail Standard – White 310ml 
Everbuild External Frame Sealant - Brown 290ml (Box of 12) 
ALM Code 7 Milled Lead - 390mm x 3m 
OX Spectrum Trade XL 3 Core & Accessories Set 
OX Pro Heavy Duty Aviation Snips Right Cut (Green) 
Gorilla Glue - Dark Brown 1L 
Code 3 Cast Lead - 150mm x 6m Flashing Tape
Best Sellers
-
Ronseal High-Performance Wood Filler – Putty Natural 30g
£9.99 Incl VAT £8.33 Excl VAT Read more -
Bond It Monster Scrim Drywall Tape – White 48mm x 90m
£6.99 Incl VAT £5.83 Excl VAT Add to basket -
Code 8 Cast Lead – 1200mm x 3m
£414.12 Incl VAT £345.10 Excl VAT Add to basket -
Spax T-Star Plus Washer-Head Wirox Coated Screws – 6.0 x 140mm
From: £7.99 Incl VAT £6.66 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Standard Safety Gloves (Various Colours)
£1.18 Incl VAT £0.98 Excl VAT Add to basket -
Bond It Cyanoacrylate Superglue Medium Viscosity, Clear – 20g
£3.99 Incl VAT £3.33 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
