ALM Code 7 Milled Lead - 450mm x 6m 
Everbuild Forever Grey Silicone Sealant – 295ml 
ALM Code 5 Milled Lead - 240mm x 3m 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
Code 8 Cast Lead - 914mm x 6m 
Code 6 Cast Lead - 240mm x 6m 
Ronseal Stays White Ultra Tough White Satin Paint - 2.5L 
Bond It Rain-Mate All Weather Sealant - Black EU3 
Code 5 Cast Lead - 914mm x 6m 
OX Pro Grout Remover 
Timco Chalk Line Set 
Timloc Universal Roof Slate Vent + Adaptor kit 
Easy-Trim Lead R Flashing Smooth – 300mm x 5m 
Everbuild Forever Grey Silicone Sealant – 295ml (Box of 12) 
Cromar Vent 3 Classic Breathable Membrane - 1.5m x 50m 
FaithFull Soft Grip Chisel - 4 Piece Set 
ALM Code 8 Milled Lead - 150mm x 6m 
Sika MultiSeal Self Adhesive Bituminous Sealing Tape - (300mm x 10m) 
Timco Pozi C2 Strong-Fix Twin Cut Screws - 4.0mm x 40mm (Box of 200) 
Ronseal Stays White 2in1 Paint & Primer - Satin 750ml 
Armatool Mop Heads Size 12 
Bond It Duct Tape - Silver 48mm x 45M 
Freeflow 112mm Round Gutter System Running Outlet - Black 
Klober Universal Tile Vent Antique Red KG9854 (Box of 10) 
Everflex Contract 125 One Hour Caulk, White - 300ml (Box of 25) Flashing Tape
Best Sellers
-
Timloc Mini Castellated Tile Vent Red (Box of 14)
£279.86 Incl VAT £233.22 Excl VAT Read more -
Code 4 Cast Lead – 510mm x 3m
£88.54 Incl VAT £73.78 Excl VAT Add to basket -
Bond It High Gloss Block Sealer – Clear 5L
£59.99 Incl VAT £49.99 Excl VAT Add to basket -
Cromar ProRidge Universal Ridge System – 6m Kit
£34.99 Incl VAT £29.16 Excl VAT Read more -
Samac Aluminium Clout Nails – 30mm x 2.65mm
From: £15.70 Incl VAT £13.08 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Thompson’s Drive Seal – Black 5L
£22.99 Incl VAT £19.16 Excl VAT Read more
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
