Timco Air Wedge 
Ronseal Hairline Crack Ready Mix Wall Filler - White 330g 
Everbuild 209 Liquid Mortar Tone - Black 5 Litre 
Soudal Bathroom & Kitchen Silicone - White 290ml (Box of 12) 
Timco Metal Galvanised Insulation Discs - 35mm 
Cromar Vent 3 Classic Breathable Membrane - 1m x 25m 
Freeflow 65mm Square Gutter Drain Pipe Shoe - Black 
Colron Refined Finishing Wax - 325g 
Everbuild All Purpose Ready Mixed Filler - 1kg 
FloPlast Half Round Downpipe 112° Bend, Black 
12 x Cromar Vent 3 Light Breathable Membrane - 1m x 50m 
Isoflex Special Primer - 750ml 
Bond It De-Bond Mate Silicone Sealant Remover Gel - 125ml Amber/Brown 
Code 3 Cast Lead - 760mm x 3m 
Bulk Pallet 72 Packs- FirmaHold 2.8 x 63/3CFC Collated Clipped Head Nails & Fuel Cells - Ring Shank 
Ronseal Ultra Tough Mattcoat Clear Varnish - 2.5L 
Everbuild 501 PVA - 5 Litre 
Code 5 Cast Lead - 600mm x 6m 
Everbuild Lead Mate Patination Oil – 1 Litre 
Soudal Window & Door Expanding Foam - Genius Gun Max 600ml Champagne (Box of 12) 
Aluflow Downpipe Offset Bend - 112° (RAL Colours) 
Bond It Superglue Activator Accelerator Spray Cyanoacrylate Aerosol - 400ml 
Everbuild Pinkgrip SF But It’s White – 380ml (Box of 12) 
Everbuild Heat Mate Silicone Sealant - Red 295ml (Box of 12) Flashing Tape
Best Sellers
-
Siroflex Trade Mortar Repair Cement – Grey 300ml
£10.99 Incl VAT £9.16 Excl VAT Add to basket -
DeWalt Professional Wet & Dry Vacuum – 240V 1050W 20 Litre
£89.99 Incl VAT £74.99 Excl VAT Read more -
Ronseal Precision Finish Brush – 1.5 Inch
£7.99 Incl VAT £6.66 Excl VAT Add to basket -
Armatool Leather Pouch & Leather Belt
£64.98 Incl VAT £54.15 Excl VAT Add to basket -
Timco FirmaHold Collated Brad A2 Stainless Steel Nails – 16G x 50mm (2000 Pieces)
£34.99 Incl VAT £29.16 Excl VAT Add to basket -
Ronseal 10 Year Weatherproof Wood Paint (2 in 1 Formula) – Gloss 2.5L
From: £26.99 Incl VAT £22.49 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
