Bond It B3 Fill And Fix Expanding Foam Gun Grade - Beige 750ml 
Gorilla Contact Adhesive Tube - Clear 75g 
Everbuild Lumberjack 5 Minute Wood Adhesive Deal 
Everbuild Mitre Fast Industrial Kit Superglue & Activator 
Timloc Rad-Seal Recessed 
IKO Shed Felt - Green 10m Roll 
Timloc Plain Tile Vent Red (Box of 14) 
Soudal Fix ALL Flexi – Black 290ml (Box of 12) 
Circular Soffit Vent, Black 
Armatool Slate Rip, Forged Steel 
ALM Code 7 Milled Lead - 360mm x 3m 
Everbuild Black Jack 906 Bitumen Roofing Emulsion – 5 Litre 
FloPlast Half Round Fascia Bracket, Brown – 112mm 
Ronseal Expanding Foam Filler - 300ml 
Thompson's Emergency Roof Seal - Black 1L 
Code 7 Cast Lead - 360mm x 6m 
Youngman Spacemaker Loft Ladder (30234000) 
Everbuild PVCu Acti-Spray – Clear 200ml 
Everbuild 202 Integral Liquid Waterproofer – 5 Litre 
Everbuild P18 Gas Leak Detector - 400ml 
Everbuild Stixall Extreme Power – Clear 290ml 
ALM Code 6 Milled Lead Flashing - 390mm x 6m 
Soudal Lead Sheet Sealant 290ml - Grey (Box of 12) Flashing Tape
Best Sellers
-
Code 8 Cast Lead – 150mm x 3m
£51.41 Incl VAT £42.84 Excl VAT Add to basket -
Samac Aluminium Clout Nails – 85mm x 3.35mm
From: £15.70 Incl VAT £13.08 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
ALM Code 5 Milled Lead – 1000mm x 6m
£430.46 Incl VAT £358.72 Excl VAT Add to basket -
ALUKAP-XR 60mm Bar, RAL Powder Coat
From: £159.72 Incl VAT £133.10 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
IKOflash Lead Free Flashing
From: £43.95 Incl VAT £36.63 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Timco Hazard Tape
£6.99 Incl VAT £5.83 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
