Ronseal Exterior Multi-Purpose Smooth Finish Filler - Grey 1.2Kg 
Code 5 Cast Lead - 150mm x 6m 
Soudal B1 Fire & Acoustic Expanding Foam Genius - 600ml 
Soudal Window & Door Expanding Foam - Genius Gun Max 600ml Champagne (Box of 12) 
ALM Code 8 Milled Lead - 914mm x 3m 
Premium Flashpoint Lead Sealant - Grey 
Soudal Trade Sanitary Silicone - White 290ml (Box of 12) 
Samac Aluminium Clout - 1kg (40mm x 2.65mm) 
ALM Code 6 Milled Lead Flashing - 760mm x 6m 
Soudal Degrip All Spray – 400ml 
Soudal Soudafoam Gap Filler Hand Held 750ml 
Everbuild Showerproof Bathroom Silicone – White 280ml 
Oxidised Bitumen Slab - 23kg 
Timco FirmaHold Collated ST Brad Nails A2 SS - 18g x 5000 PCS 
Timloc 1206 Underfloor Vent Horizontal Rear Extension + 100mm 
Ronseal Ultimate Finish Decking Pad Kit 
Ronseal Ultra Tough Hardglaze Clear Varnish - 750ml 
Ronseal Anti-Condensation Paint - Matt White 750ml 
Timloc InvisiWeep Extension Tube - 500mm Clear 
Double Nylon Tool Pouch with Belt 
Soudaseal Mirror Light Grey, 290ml 
OX Tools Diamond Blade Triple Pack 115/22.23mm 
Klober Small Slate Vent - Slate Grey 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Slate Grey (Box of 5) 
Bond It Multi-Wipes For Hands, Tools & Surfaces - White 100 Flashing Tape
Best Sellers
-
ALM Code 7 Milled Lead – 150mm x 6m
£90.62 Incl VAT £75.52 Excl VAT Add to basket -
Timco Flat Wood Bit Set
£11.99 Incl VAT £9.99 Excl VAT Add to basket -
Code 6 Cast Lead – 360mm x 3m
£91.39 Incl VAT £76.16 Excl VAT Add to basket -
Estwing Roofers Pick Smooth Face Hammer – 21oz
£62.00 Incl VAT £51.67 Excl VAT Add to basket -
Eco-Shovel & Hard Brush Black Large Pan
£21.50 Incl VAT £17.92 Excl VAT Add to basket -
Soudal Genius Gun Pipe & Plumbing Foam – 600ml (Box of 12)
£55.20 Incl VAT £46.00 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
