Bond It Trowel Mastic - Black 2.5L 
FloPlast Half Round Union Unit - White 
Everbuild Everflex Lead Mate Sealant Grey - 295ml (Box of 25) 
Ronseal's EGC Hardener BPO - 30g 
Bond It Pro-Mate LMA Silicone - Translucent EU3 
ALM Code 5 Milled Lead - 180mm x 6m 
Code 5 Cast Lead - 450mm x 3m 
Ronseal Stays White Ultra Tough White Satin Paint - 2.5L 
Everbuild Lumberjack 5 Minute PU Wood Adhesive Gel – 310ml 
Klober Boll Roll Tile Vent KG6085, Brown 
ALM Code 8 Milled Lead - 800mm x 6m 
Timco FirmaHold Collated Clipped Head Nails - Gun Nails (3.1mm x 90mm) 
Siroflex Trade Superglue Activator Spray - 200ml 
OX Pro Pool Trowel, Rigid 450MM / 18" 
Ronseal Exterior Yacht Varnish - Gloss 1L 
Code 8 Cast Lead - 1000mm x 3m 
Timco 5 x 8m Heavy Duty Tarpaulin, Green 
Everbuild Flexible Decorators Filler – White 290ml 
Everbuild Stixall Extreme Power – Brown 290ml 
Ronseal Diamond Hard Floor Wax - Natural Oak 2.5L 
Bond It Dustproof & Hardener - Clear 5L 
Ronseal Stays White 2in1 Paint & Primer - Matt 750ml 
Everbuild Pro Blue Masking Tape - 25mm x 33mm 
Code 4 Cast Lead - 800mm x 3m Flashing Tape
Best Sellers
-
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – Clear 300ml (Box of 12)
£69.96 Incl VAT £58.30 Excl VAT Add to basket -
Bond It Paving & Patio Seal – Clear 25L
£68.99 Incl VAT £57.49 Excl VAT Add to basket -
Everbuild 502 Wood Adhesive – 5 Litre
£23.99 Incl VAT £19.99 Excl VAT Add to basket -
ALUKAP-SS High Span Gable Bar, RAL Powder Coat
From: £707.35 Incl VAT £589.46 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Bond It Exterior Pregrit – Light Green 10L
£17.99 Incl VAT £14.99 Excl VAT Read more -
Permavent Plain Easy – Box of 20
£59.99 Incl VAT £49.99 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
