Klober Double Roman Roof Tile Vent - Brown KG9857-3-0247 (Box of 10) 
Hambleside Danelaw CON6+ Dry Ridge 6m Kit 
Ronseal Expanding Foam Filler - 300ml 
Cromar Roof Felt Adhesive - Black 1 Litre 
Cromar Bitumen Primer – Black 1 Litre 
Oxyturbo Maxy Gas Refill 
ALM Code 8 Milled Lead - 450mm x 3m 
OX Pro Jab Saw - 6.5" / 165mm & Holster Pack 
Soudal Genius Gun Soudafoam Window and Door - 600ml 
Hambleside Danelaw TV15/4 Tile Vent - Antique Red (Box of 5) 
Ulti-Mate 110/110mm Flexipipe 
Cromar Aluminium Solar Reflective Paint – 2.5 Litre 
Everbuild 204 Evermix 3 in 1 - 5 Litre 
Ronseal's EGC Hardener BPO - 30g 
Circular Soffit Vent, Brown 
Gorilla Tape - Black (48mm x 11m) 
Everflex Premium+ 450 Builders Silicone – Translucent 300ml (Box of 25) 
Pro Magnetic Combination Square - 300mm 
Everbuild EuroScrim Plasterboard Tape – 100mm x 90m 
Hambleside Danelaw Double Roman Tile Vent, TV15/3 - Black (Box of 5) 
Everbuild Caulk Once – White 295ml (Box of 12) 
Everbuild Mitre Fast Industrial Kit Superglue & Activator 
Code 6 Cast Lead - 150mm x 6m Flashing Tape
Best Sellers
-
Timco TX20 Deck-Fix Twin-Cut Decking Screw – Various Sizes
From: £12.99 Incl VAT £10.83 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
ALM Code 5 Milled Lead – 450mm x 3m
£96.29 Incl VAT £80.24 Excl VAT Add to basket -
Everbuild Heat Resistant Paint Matt Black, 125ml
£10.99 Incl VAT £9.16 Excl VAT Read more -
ALM Code 5 Milled Lead – 760mm x 3m
£164.26 Incl VAT £136.88 Excl VAT Add to basket -
Soudal Firecement HT, Black – 300ml
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
Everbuild PinkGrip MS – 290ml
£8.49 Incl VAT £7.08 Excl VAT Read more
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
