Bond It Cyanoacrylate Superglue Medium Viscosity, Clear - 50g 
Freeflow 112mm Round Gutter System Stopend Outlet - White 
Bondit Monster Mesh Pink 50m x 1m - 160g/m2 
Everbuild EB25 Ultimate Sealant & Adhesive – Anthracite 300ml (Box of 12) 
ALM Code 7 Milled Lead - 914mm x 6m 
Bond It Cyanoacrylate Superglue Hi Viscosity - Clear 20g 
SikaBond MS Wood Floor Gun Grade - Parquet Brown 600ml 
Soudal 5 Minute D4 Wood Adhesive Gel - 290ml (Box of 12) 
Timloc Single Pantile Tile Vent Brown (Box of 11) 
Soudal Trade Gun and Foam Cleaner - 500ml 
OX Tools OX Trade Hickory Handle Claw Hammer - 16oz/450g 
Bond It Mould Stop - Clear 1L 
Everbuild PVCu Acti-Spray – Clear 200ml (Box of 12) Flashing Tape
Best Sellers
-
Timloc Plain Tile Vent Brown (Box of 14)
£279.90 Incl VAT £233.25 Excl VAT Add to basket -
Everbuild Plumbers PVC Pipe Cement – Clear 250ml (Box of 12)
£55.92 Incl VAT £46.60 Excl VAT Add to basket -
Samac Galvanised Round Wire Nails – 50mm x 2.65mm
From: £7.49 Incl VAT £6.24 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Aluflow Aluminium Downpipe – 4m (Black, White or Grey)
From: £38.53 Incl VAT £32.11 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Bond It Bitumen Primer – Black 5L
£22.50 Incl VAT £18.75 Excl VAT Add to basket -
Gorilla Waterproof Coat & Seal Liquid Rubber Coating – Black 473ml
£25.49 Incl VAT £21.24 Excl VAT Read more
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
