Timco Twin-Cut C2 Floor-Fix Screws - 4.2mm x 55mm (Tub of 250) 
Hambleside Danelaw Double Pantile Vent TV15/2 - Slate Grey (Box of 5) 
ALM Code 8 Milled Lead - 450mm x 3m 
Everbuild Black Jack 904 Roof Felt Adhesive – 5 Litre 
Code 7 Cast Lead - 300mm x 6m 
OX Pro Impact Drill & Drive Accessory Set - 40 Piece 
Bond It Aluminium Foil Tape - 100mm x 45M (Box of 12) 
ALM Code 5 Milled Lead - 450mm x 6m 
Timloc 1205 Underfloor Vent Horizontal Duct Adapter - 110mm 
OX Pro Wide Head End Cutting Nippers - 200mm 
Ronseal Exterior Yacht Varnish - Satin 1L 
OX Pro Moulding Bar - 10" / 250mm 
Timco Lithium EP2 Grease - 400g 
Klober Thin Line Vent - Antique Red KG9855-3-0116 (Box of 10) 
FloPlast Square Line Stop End Outlet White – 114mm x 65mm 
Ronseal's EGC Hardener BPO - 30g 
Soudal Aquafix All Weather Sealant – Clear 300ml 
Timloc 1203 Underfloor Vent Horizontal Front Extension + 115mm 
Everbuild Maximum Torque - White 290ml 
Everbuild Lumberjack 550 Floor Adhesive – Buff 300ml (Box of 12) 
ALM Code 3 Milled Lead - 180mm x 6m 
Klober Dry Ridge System, 6m (KR5200) 
Code 8 Cast Lead - 150mm x 3m 
Code 5 Cast Lead - 760mm x 6m 
Timco Heavy-Duty Tarpaulin - 2m x 3m 
Everbuild Everflex Contract 700T LMN Silicone - Bronze (Box of 25) 
Ox Tools Spectrum Superior Diamond Blade 115/22.23mm 
Soudal Fix ALL Flexi – White 290ml (Box of 12) 
Everbuild Forever Ivory Silicone Sealant – 295ml (Box of 12) 
Bond It Rain-Mate All Weather Sealant - Black EU3 
Freeflow 65mm Square Down Pipe Connector - Black 
Soudal Cartridge Gun Heavy Duty - Black 310ml 
Soudal Trade Gun and Foam Cleaner - 500ml Flashing Tape
Best Sellers
-
Bond It Cover-It Carpet Protector – Clear 625mm X 50M
£18.99 Incl VAT £15.83 Excl VAT Add to basket -
OX Pro Club Hammer
From: £29.99 Incl VAT £24.99 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Everbuild Silicone Spray – 400ml (Box of 12)
£54.96 Incl VAT £45.80 Excl VAT Read more -
Everbuild Jetcem Waterproof Rapid Repair Cement – 3kg
£12.99 Incl VAT £10.83 Excl VAT Read more -
Everbuild Exact Gap Foam – 750ml (Box of 12)
£109.92 Incl VAT £91.60 Excl VAT Read more -
Freeflow Square Gutter System Stopend Outlet – White
£3.59 Incl VAT £2.99 Excl VAT Read more
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
