OB1 Diamond Crystal Clear Universal Sealant & Adhesive 290ml 
Code 7 Cast Lead - 1000mm x 3m 
Bond It Bitumen Paint - Black 5L 
Samac Aluminium Clout Nails - 55mm x 3.35mm (1kg) 
Everbuild Stainblock - White 400ml 
Cromar Bitumen Trowel Mastic - Black 2.5L 
Soudafoam Gap Filler Gun Grade – 750ml (Box of 12) 
ALM Code 8 Milled Lead - 390mm x 6m 
Everbuild XT44 Maintenance Spray - 400ml 
Everbuild Everflex Fire Mate Intumescent Sealant – 295ml 
Code 8 Cast Lead - 360mm x 3m 
Everbuild Lumberjack 30 Minute PU Wood Adhesive Gel - 310ml (Box of 12) 
FloPlast Half Round To Cast Iron Half Round Gutter Adaptor - Black 
Bond It One Hit Wonder Lightweight Filler - White 1L 
Code 5 Cast Lead - 850mm x 6m 
Everbuild One Strike Filler - White 5L 
Soudal 30 Min D4 Gel PU Wood Adhesive Trade - 290ml 
Ronseal Stays White Ultra Tough White Satin Paint - 750ml Flashing Tape
Best Sellers
-
OX Tools Waterproof Thermal Latex Gloves
From: £5.99 Incl VAT £4.99 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
ALM Code 4 Milled Lead – 210mm x 3m
£36.82 Incl VAT £30.68 Excl VAT Add to basket -
Gorilla Glue – Dark Brown 60ml
£8.50 Incl VAT £7.08 Excl VAT Add to basket -
Freeflow Square Gutter System Gutter 90° Angle – Black
£3.49 Incl VAT £2.91 Excl VAT Add to basket -
Bond It PVCu Solvent Fast Acting Cleaner – Clear 1L
£7.29 Incl VAT £6.08 Excl VAT Add to basket -
Samac Aluminium Clout Nails – 60mm x 3.35mm
From: £15.70 Incl VAT £13.08 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
