Ronseal Diamond Hard Doorstep Paint - Black Satin 750ml 
Bond It Cove-Mate Coving Adhesive - White EU3 
OX Pro Top Steady Nail-On (Veneer) Clamp Set 
FloPlast Half Round Fascia Bracket, White – 112mm 
Ronseal Anti-Condensation Paint - Matt White 750ml 
ALM Code 3 Milled Lead - 210mm x 3m 
Everbuild Stixall Extreme Power - White 290ml (Box of 12) 
Everbuild Anchorset Green 300 - Grey 300ml 
Soudal Neoprene Contact Adhesive Liquid Glue 44A – 50ml 
OX Tools Pro Sharpdraw Snap Off Pencil Replacement Blades - Set of 3 
Ronseal Quick Drying Smooth Finish Filler - 600g 
ALM Code 7 Milled Lead - 850mm x 6m 
ALM Code 8 Milled Lead - 760mm x 6m 
Bond It Mega Stik PU Adhesive - Beige 750ml 
Everbuild Tarmac Restorer - 5 Litre 
FloPlast Ogee Fascia Bracket, Black 
Everbuild 501 PVA - 1 Litre 
Everbuild KOS Fire Cement Buff – 500g 
Bond It Patination Oil 1L 
Timloc Universal Slate Roof Vent Adaptor Only 
Ronseal One Coat All Surface Primer and Undercoat - White 250ml 
Permavent Plain Easy - Box of 20 
ALM Code 4 Milled Lead - 210mm x 3m Flashing Tape
Best Sellers
-
12 x Cromar Vent 3 Pro Breathable Membrane 1m x 50m
£576.00 Incl VAT £480.00 Excl VAT Add to basket -
Soudal Genius Gun Gap Filling and Expanding Foam – 500ml
£7.99 Incl VAT £6.66 Excl VAT Add to basket -
Soudal PU Plasterboard Adhesive – Genius Gun
£10.99 Incl VAT £9.16 Excl VAT Add to basket -
Code 4 Cast Lead – 800mm x 6m
£279.89 Incl VAT £233.24 Excl VAT Add to basket -
OX Pro Mortar Spike, 300mm
£11.49 Incl VAT £9.58 Excl VAT Add to basket -
Everbuild Tecnic Silicone 825 – Limestone White 380ml (Box of 25)
£139.75 Incl VAT £116.46 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
