Everbuild 204 Evermix 3 in 1 - 5 Litre 
Roughneck® Gorilla Bar Twin Pack - 35cm & 55cm (14in & 22in) 
Timco Lithium EP2 Grease - 400g 
FloPlast Round 92½° Bend - White 
Klober Single Pantile Vent - Brown KG9860-0247 (Box of 10) 
Code 6 Cast Lead - 1200mm x 6m 
ALM Code 6 Milled Lead Flashing - 210mm x 6m 
Everbuild General Purpose Silicone - Black 290ml (Box of 12) 
Ronseal One Coat Stain Block - White 2.5L 
Everbuild Black Jack 904 Roof Felt Adhesive – 5 Litre 
Thompson's One Coat Waterseal - 1L 
OX Trade 14 Drive Socket Set - 35 Piece 
Code 3 Cast Lead - 600mm x 3m 
Everbuild P13 Plumbers Putty - Beige 750g 
Everbuild Black Jack 902 Bitumen & Flashing Primer – 1 Litre 
Ronseal One Coat Stays White Radiator Paint - Gloss 750ml 
Ulti-Mate Bold Roll Brown Tile Vent 
Ronseal One Coat Stays White Radiator Paint - Matt 750ml 
FloPlast Square Line Running Outlet Black – 114mm x 65mm 
Ronseal Multi Purpose Wood Filler - Natural 930g Flashing Tape
Best Sellers
-
ALM Code 3 Milled Lead – 360mm x 6m
£90.62 Incl VAT £75.52 Excl VAT Add to basket -
Everbuild Lumberjack 5 Minute PU Wood Adhesive Gel – 310ml
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
Bond It Silicone Release Spray – 500ml Clear (Mould Releasing Lubricant)
£7.49 Incl VAT £6.24 Excl VAT Add to basket -
Ronseal Exterior All Surface Primer & Undercoat – White 750ml
£14.99 Incl VAT £12.49 Excl VAT Read more -
Sika MaxMix Colour – 1 Litre
From: £14.99 Incl VAT £12.49 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Everbuild ASBO Graffiti Remover – 400ml
£9.49 Incl VAT £7.91 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
