ALM Code 3 Milled Lead - 760mm x 3m 
Everbuild Maximum Torque - White 290ml 
Everbuild Everflex Premium 145 Butyl Rubber Sealant - Grey 300ml (Box of 12) 
Everbuild Showerproof Bathroom Silicone - Clear 280ml 
Everbuild Caulk Once – White 380ml 
Ronseal Exterior Multi-Purpose Smooth Finish Filler - Grey 1.2Kg 
Thompson's Emergency Roof Repair Mastic - Black 750ml 
Everbuild 503 SBR Bond – 2.5 Litre 
Klober Boll Roll Tile Vent KG6085, Brown 
OX Pro Super Open Mouth Tool Bag 
Easy-Trim End Cap Angled - Black (Box of 10) 
Code 3 Cast Lead - 1200mm x 6m 
Klober Plain Roof Tile Vent Adaptor - KG990500 
OX Pro Tuff Spirit Level - 600mm 
Bond It Mould Stop - Clear 2.5L 
Klober Uni-line Vent Slate Grey 
Soudafoam Gap Filler Gun Grade – 750ml 
Bond It Monster Wipes - White 75 Wipes 
Cromar Cromaprufe - Black 5 Litre 
Everbuild Caulk Once – White 295ml 
Standard Brush 4-Inch 
Everbuild Pinkgrip SF But It’s White – 380ml (Box of 12) 
Timco High Visibility Wet Paint Tape 
Gorilla Super Glue Gel Twin Pack - Clear 3g Flashing Tape
Best Sellers
-
Timco Classic Pozi Multi-Purpose Screws – Mixed Tray
£21.49 Incl VAT £17.91 Excl VAT Add to basket -
Soudal Superglue Activator – 200ml (Box of 12)
£27.60 Incl VAT £23.00 Excl VAT Add to basket -
Bond It Cover-It Hardfloor & Glass Protector – Blue 625mm X 50M
£21.99 Incl VAT £18.33 Excl VAT Add to basket -
Wakaflex Lead Alternative, Lead Free Flashing
From: £56.70 Incl VAT £47.25 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
YBS SuperQuilt 19 Multi-Layer Foil Insulation – 1.2m x 10m
£119.99 Incl VAT £99.99 Excl VAT Read more -
ALM Code 6 Milled Lead Flashing – 300mm x 3m
£76.46 Incl VAT £63.72 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
