Code 5 Cast Lead - 450mm x 6m 
Soudafoam Window & Door Xtra Gun Grade, Champagne - 750ml 
Klober Regent Tile Vent KG6084, Dark Brown 
FloPlast Universal Hopper, Brown – 65-68mm 
Bond It Rubber Bitumen Emulsion - Black 2.5L 
Ronseal Stays White 2in1 Paint & Primer - Satin 2.5L 
Ronseal One Coat Water-Based Tile Paint - Black Gloss 750ml 
ALM Code 7 Milled Lead - 600mm x 6m 
Code 8 Cast Lead - 1000mm x 6m 
Timloc 1203 Underfloor Vent Horizontal Front Extension + 115mm 
Cromar Roof Felt Adhesive - Black 2.5 Litre 
Timco Aluminium Hawk 
OX Tools OXIT Sealant & Adhesive - Anthracite 290ml (Box of 12) Flashing Tape
Best Sellers
-
Cromar Acrypol+ Plus Roof Coating Waterproof System – 20kg (Various Colours)
From: £245.00 Incl VAT £204.17 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Siroflex Contractors Lead Sheet Silicone – Grey 300ml
£12.49 Incl VAT £10.41 Excl VAT Add to basket -
Ronseal Multi Purpose Wood Filler – 325g
From: £9.67 Incl VAT £8.06 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Everbuild Everflex Fire Mate Intumescent Sealant – 295ml (Box of 25)
£50.00 Incl VAT £41.67 Excl VAT Add to basket -
Hambleside Danelaw (HD DPCSPA) Tile Vent Adaptor and Flexi for TV10 Range
£18.99 Incl VAT £15.83 Excl VAT Add to basket -
Klober Tile Vent for Redland Stonewold Mark II, KG6083
From: £49.99 Incl VAT £41.66 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
