Lead Flexi Slate Pipe Flashing - Pitched 
ALM Code 4 Milled Lead - 180mm x 3m 
Cromar Roof Felt Adhesive - Black 2.5 Litre 
Timloc Double Roman Tile Vent Red (Box of 6) 
Leadax Lead Free Flashing Alternative 300mm (6M Rolls) 
Ronseal Stays White 2in1 Paint & Primer - Satin 2.5L 
Timco Assorted Horseshoe Shims - 1.0 to 6.0mm (Box of 200) Flashing Tape
Best Sellers
-
Axiome 16mm Triplewall Polycarbonate Sheet, Opal
From: £49.37 Incl VAT £41.14 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Code 8 Cast Lead – 150mm x 6m
£102.82 Incl VAT £85.68 Excl VAT Add to basket -
Everbuild Everflex Premium 145 Butyl Rubber Sealant – Grey 300ml
£7.48 Incl VAT £6.23 Excl VAT Add to basket -
Axiome 35mm Multiwall Polycarbonate Sheet, Bronze
From: £73.24 Incl VAT £61.03 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Hambleside Danelaw (HD RSPA) Adaptor and Flexi for TV10 Range
£16.99 Incl VAT £14.16 Excl VAT Add to basket -
Samac Galvanised Wire Balloon – Various Sizes
From: £7.49 Incl VAT £6.24 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
