ALM Code 4 Milled Lead - 760mm x 6m 
ALM Code 3 Milled Lead - 1000mm x 6m 
Everbuild Superflow Sealant Gun - C3 (290ml - 310ml) 
Timco Self-Drilling Wing-Tip Metal Construction Screw 
Freeflow Square Gutter System Gutter 90° Angle - Black 
FloPlast Half Round Stop End Outlet, White – 112mm 
Sika MaxMix Waterproofer - 1 Litre 
Code 7 Cast Lead - 1200mm x 6m 
Cromar Vent 3 Light Breathable Membrane - 1m x 25m 
ALM Code 5 Milled Lead - 450mm x 6m 
Everbuild Instant Nails – White 290ml (Box of 12) 
Everbuild Anchorset Green 300 - Grey 300ml (Box of 12) 
Bond It PVCu Solvent Free Cream Cleaner - White 1L 
Left Hand Klober Contract Dry Verge Unit Grey 
Soudal PTFE Spray - 400ml 
ALM Code 7 Milled Lead - 1200mm x 6m 
Timco Collated Drywall Self Drilling Screws 
Code 5 Cast Lead - 360mm x 6m 
FloPlast Half Round Gutter 135° - White 
Everbuild Triple Action Wood Treatment – 1 Litre 
Soudal 30 Min D4 Gel PU Wood Adhesive Trade - 290ml 
Everbuild Stixall Extreme Power - Clear 290ml (Box of 12) 
Everbuild Everflex Premium+ 565 Clean Room Silicone – White 295ml (Box of 25) 
OB41 Multi-Use Penetrating Oil Spray - 400ml 
ALM Code 8 Milled Lead - 210mm x 6m 
Timco Heavy Duty Tarpaulin - 4m x 5m Flashing Tape
Best Sellers
-
ALM Code 6 Milled Lead Flashing – 850mm x 6m
£433.30 Incl VAT £361.08 Excl VAT Add to basket -
Everflex Premium+ 450 Builders Silicone – White 300ml (Box of 25)
£120.75 Incl VAT £100.63 Excl VAT Add to basket -
Easy-Trim Lead R Flashing Smooth – 300mm x 5m
£42.20 Incl VAT £35.17 Excl VAT Add to basket -
OX Trade Stubby Level – 100mm
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
Axgard 2mm Solid Polycarbonate Sheet, Clear
From: £10.15 Incl VAT £8.46 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Freeflow 65mm Square Gutter Drain Pipe Shoe – Black
£2.09 Incl VAT £1.74 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
