Code 4 Cast Lead - 760mm x 6m 
OX Pro Tuff Spirit Level - 600mm 
Bond It No Crack Caulk - White 310ml 
Everbuild General Purpose Silicone - White 280ml (Box of 12) 
Code 5 Cast Lead - 180mm x 3m 
Code 8 Cast Lead - 450mm x 3m 
ALM Code 5 Milled Lead - 760mm x 3m 
Bond It Frame-Mate Door & Window Sealant - White EU3 
Code 3 Cast Lead - 914mm x 6m 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – Clear 300ml 
Code 6 Cast Lead - 760mm x 6m 
Bond It All Weather Roofing Compound - Black 25L 
ALM Code 7 Milled Lead - 510mm x 3m 
ALM Code 8 Milled Lead - 800mm x 6m 
OX Tools Pro Combination Square 300mm / 12in 
Everbuild Black Jack 901 Black Bitumen Paint – 25 Litre 
Ronseal Multi Purpose Powder Smooth Finish Filler - 500g + 50% 
Bostik Fast-Tak Permanent Adhesive - 500ml 
Bond It One Hit Wonder Lightweight Filler - White 500ml 
Ulti-Mate Plain Tile Vent Adaptor 
Soudal Aquafix All Weather Sealant – Clear 300ml 
Everbuild Jumbo Mitre Fast Kit (Box of 6) Flashing Tape
Best Sellers
-
FloPlast Side Fix Rafter Bracket
£8.99 Incl VAT £7.49 Excl VAT Add to basket -
Ronseal Quick Drying Woodstain – Satin 250ml
From: £11.99 Incl VAT £9.99 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Everbuild Stick2 Industrial Superglue GP – Transparent 50g
£5.99 Incl VAT £4.99 Excl VAT Read more -
ALM Code 4 Milled Lead – 914mm x 6m
£317.18 Incl VAT £264.32 Excl VAT Add to basket -
Cromar All Weather Roof Coat – Black 5 Litre
£20.95 Incl VAT £17.46 Excl VAT Add to basket -
OX Pro Tuff Rule – Cyan
£14.49 Incl VAT £12.08 Excl VAT Add to basket
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
