Klober Profile-Line Limarech Tile Vent - Brown KG9859-3-0247 (Box of 10) 
Klober Regent Tile Vent KG6084, Dark Brown 
Timco Pipe Shears 
ALM Code 7 Milled Lead - 300mm x 6m 
Hambleside Danelaw MONO6+ Dry Fix Ventilated Mono Ridge System 6m 
Code 5 Cast Lead - 800mm x 3m 
Easy-Trim Universal Dry Verge System - Grey 
Bond It Pro-Mate LMA Silicone - White EU3 
Code 4 Cast Lead - 600mm x 3m 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Terracotta (Box of 5) 
Siroflex Trade Superglue Activator Spray - 200ml 
Siroflex Trade Acrylic Decorators Caulk - 300ml 
Ox Tools OX Pro Aviation Snips With Holster - Right Cut (Green) 
Cromar Bitumen Primer – Black 5 Litre 
Everbuild Anchorset Green 150 - Grey 150ml 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Clear - 300ml (Box of 12) 
Ronseal uPVC Paint - Royal Blue Satin 750ml 
Soudal Genius Gun Gap Filler Expanding Foam - 600ml 
ALM Code 5 Milled Lead - 360mm x 3m 
Code 7 Cast Lead - 180mm x 6m 
ALM Code 8 Milled Lead - 760mm x 3m 
Easy-Trim End Cap Half Round - Black (Box of 10) 
Thompson's Patio & Block Paving Seal - Satin 5L 
OX Pro Super Open Mouth Tool Bag 
Ronseal One Coat Damp Seal - White 750ml 
Cromar Vent 3 Pro Breathable Membrane 1m x 50m 
Cromar Vent 3 Light Breathable Membrane - 1m x 50m Flashing Tape
Best Sellers
-
Bond It PVA & Adhesive Sealer White 1L – Box of 12
£43.98 Incl VAT £36.65 Excl VAT Add to basket -
Permavent Easy Slate 600 – Box of 100
£124.99 Incl VAT £104.16 Excl VAT Add to basket -
OX Trade Wrecking Bar
From: £7.49 Incl VAT £6.24 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Soudal Gap Filler Expanding Foam Gun Grade – 750ml
£7.99 Incl VAT £6.66 Excl VAT Add to basket -
Axgard 6mm Solid Polycarbonate Sheet, Patterned
From: £30.50 Incl VAT £25.42 Excl VAT Select options This product has multiple variants. The options may be chosen on the product page -
Everbuild Tecnic Joint Backer Rod – 10mm x 10m
£11.49 Incl VAT £9.58 Excl VAT Read more
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
