Evo-Stik Gripfill Extra Multi-Purpose - Buff 350ml 
Code 7 Cast Lead - 150mm x 6m 
Code 6 Cast Lead - 180mm x 3m 
OX Pro Brick Trowel Philadelphia Pattern - 10"/250mm 
Bond It Patio Blaster - Clear 5L 
ALM Code 3 Milled Lead - 850mm x 6m 
Code 3 Cast Lead - 800mm x 6m 
Cromar Aluminium Solar Reflective Paint – 2.5 Litre 
Ronseal Ultimate Finish Decking Applicator Refill Pads 
ALM Code 8 Milled Lead - 390mm x 6m 
OX Tools 600/1200/1800mm Pro Spirit Level Set with Bag 
Thompson's One Coat Waterseal - 5L 
Timloc Non-Profile Tile Vent Red (Box of 8) 
ALM Code 5 Milled Lead - 360mm x 6m 
Everbuild Opti-Mix Mortar Plasticiser – 1 Litre 
Everbuild Black Jack 905 All Weather Roof Coating – 25 Litre 
Patination Oil Lead Mate Flashing Protection Coating - 500ML 
Hedgehog Gutter Brush Leaf Guard Black – 4m x 100mm 
Everbuild Pinkgrip Adhesive Solvent Based - 350ml (Box of 12) 
Ronseal Multi Purpose Smooth Finish Filler - 2.2Kg 
Timco Mixed Hose Clips 
Soudal Pro 30D Waterproof Wood Adhesive - 750g 
ALM Code 4 Milled Lead - 450mm x 3m 
Everbuild Pinkgrip Adhesive Solvent Based – 350ml 
Siroflex Trade High Viscosity Superglue - 50g 
Armatool Slate Rip - Stainless Steel Flashing Tape
Best Sellers
-
Soudal Fix ALL Turbo – Grey 290ml (Box of 12)
£72.00 Incl VAT £60.00 Excl VAT Add to basket -
OX Tools OXIT Sealant & Adhesive – White 290ml (Box of 12)
£80.04 Incl VAT £66.70 Excl VAT Add to basket -
Everbuild Easi-Squeeze Flexible Decorators Filler – White 200ml
£6.99 Incl VAT £5.83 Excl VAT Add to basket -
OX Pro Pipe Trowel – 260mm x 75mm
£15.14 Incl VAT £12.62 Excl VAT Add to basket -
Timloc Felt Support Tray 600mm
£4.99 Incl VAT £4.16 Excl VAT Add to basket -
Permavent Permalap – 50mm x 25m
£28.00 Incl VAT £23.33 Excl VAT Read more
Flashing Tape
Roofing flashing tape, also known as flashband or lead flashing tape, is one of many ways to protect, repair, and watertight seal something permanently. Due to its heat resistance and ability to provide an immediate watertight seal on an enormous variety of surfaces, it is an essential part of any roofing project. In addition, it comes in multiple sizes to suit your roof needs.Â
Among our range, we have the excellent Cromar Flashing Tape, Bostik Flashing Tape and Everbuild’s flashing trade tape.
How To Apply Flashing Tape the Correct Way
To help out, here is a short guide on how to apply flashing tape.
Cut the Flashing Strip to the length required. To avoid any creasing, remove approximately 50mm of backing paper and carefully position the sealing strip. Hold the backing paper firmly and release it steadily from the sealing strip as the product is applied.
Smooth into position using hand pressure. Use a seam roller or rounded wood smooth to ensure good contact and expel any air, especially on overlaps and at the edges. When laying adjacent rolls, Flashing Strip should be overlapped by a minimum of 25mm for a watertight seal.Â
The seam must be pressed firmly with a hand roller paying particular attention at the point of overlap. Remember, if applying this in cold weather (5-15 Celsius), storing the flashing tape in a warm place is highly recommended before use. If possible, it is also suggested to warm up the surface slightly.
