Bond It The Beast PU Adhesive - Brown 500ml 
Ronseal Anti-Condensation Paint - White 2.5L 
Bond It PVA & Adhesive Sealer - White 5L 
OX Pro Impact Bit Set - 11 Piece 
Everbuild Dual Purpose Foam Cleaner – 500ml 
Easy-Trim Over Fascia Vent - 10mm x 1m 
Soudal Gun & Foam Cleaner Gun Grade - 500ml 
Siroflex Heavy Duty PVCu Solvent Cleaner - 1L 
Youngman Double Section Roof Ladder 4.89m (57664600) 
Everbuild Everflex 200 Contractors LMA Silicone - Brown 295ml 
Everbuild Roof & Gutter Sealant - Black 295ml (Box of 12) 
Everbuild Power Pro Sealant Gun - 290 to 380ml (Box of 12) 
Armatool Batten Gauge - Up to 14" 
Soudal Soudabond 265 Classic Spray - 500ml 
Bond It PVA & Adhesive Sealer - White 2.5kg 
Soudal Insulating Foam Genius Gun 750ml - Champagne (Box of 12) 
ALM Code 4 Milled Lead - 510mm x 3m 
Ronseal Quick Drying Smooth Finish Filler - 600g 
Ox Tools OX Pro Aviation Snips With Holster - Right Cut (Green) 
ALM Code 8 Milled Lead - 360mm x 6m 
Timco 6pcs Stubby Screwdriver Assorted Set 
Timco Blue Polypropylene Rope 8mm x 15m 
Armatool Slate Guillotone 
Everbuild Seal Rite Strip / Smooth Out Twin Pack 
OX Pro Heavy Duty Aviation Snips Left Cut (Red) 
Hambleside Danelaw Double Roman Tile Vent, TV15/3 - Brown (Box of 5) 
Bond It Roof-Mate Roof & Gutter Sealant - Black EU3 
Bondit Monster Mesh Pink 50m x 1m - 160g/m2 
Bond It Cyanoacrylate Superglue Hi Viscosity - Clear 20g 
ALM Code 5 Milled Lead - 450mm x 6m 
Everflex Premium+ 450 Builders Silicone – Grey (Box of 12) 
Uses
The Rubber Bitumen Emulsion by Bond is excellent and highly effective at providing a damp-proof membrane in sandwich constructions and water protection for floors, walls, and other above-ground structures. It's formed into a bituminous waterproofing compound that can also act as a curing membrane when applied to green concrete. This product can also be an equally effective adhesive for wood blocks, wood mosaic panels, insulation boards, expanding polystyrene, and cork panels.
Preparation
Preparing the surface should be done in accordance with the British Standard 8102 Code of Practice—for the protection of buildings against water from the ground. Besides that, cleaning the surface and removing any contaminants that can hinder this product's adhesion, including dirt, dust, grease, oil, organic growth, etc., should be removed.
Application
- This product should be applied via brush.
- When applying it to damp-proof floors, apply two coats with the second brushed perpendicular to the first, then apply a 50mm sand/cement or concrete screed on top.
- For weatherproofing walls, it depends on how damp they are. If it's extremely damp, hack away to the brickwork and apply three coats of the emulsion to the interior and if you can, exterior as well.
- If they aren't as damp, but damp is present, remove any paint or wallpaper and lightly dampen the wall with water, then apply three coats over. Ensure when applying to internal walls, you allow a 300mm deep horizontal strip along the top of the wall to allow any moisture to escape via evaporation.
