Code 4 Cast Lead - 510mm x 3m 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Brown (Box of 5) 
Ronseal Stays White Ultra Tough White Satin Paint - 750ml 
Code 6 Cast Lead - 450mm x 3m 
Bond It Pro-Mate LMA Silicone - White EU3 
Ronseal Wet Rot Wood Hardener - 750ml 
Ronseal 3 in 1 Mould Killer - 500ml 
Ronseal Interior Varnish - Clear Gloss 2.5L 
Ronseal Knot Block Primer & Undercoat - White 2.5L 
Ronseal Ultra Tough Satincoat Clear Varnish - 5L 
Bondit Monster Mesh Pink 50m x 1m - 160g/m2 
Klober Single Pantile Vent - Brown KG9860-0247 (Box of 10) 
ALM Code 4 Milled Lead - 210mm x 6m 
Gorilla Tape - Black (48mm x 32m) 
Everbuild PVC Hazard Tape - Black/Yellow (50mm x 33m) 
Bond It High Gloss Block Sealer - Clear 5L 
Everbuild Lumberjack 5 Minute Polyurethane Wood Adhesive Liquid – 750ml 
Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml 
Code 8 Cast Lead - 1200mm x 6m 
Soudal PVCu Cream Cleaner - 1L 
Klober 20K Slate Vent KG9795-0429 Slate Grey 
Soudal Construction Silicone, Clear - 290ml (Box of 12) 
Bond It Mould Stop - Clear 1L 
Timloc Universal Slate Roof Vent Pipe Adaptor Kit 
Easy-Trim Ridge F Universal Dry Ridge System - 6m Kit (Pallet of 84 Boxes) 
Everbuild Roof & Gutter Sealant – Black 295ml 
This Squeezy, Solvent-Free Adhesive by Bond It excels at delivering great adhesive results without harming the environment. Irrespective of your experience, this product comes straight from the bottle and can be applied directly easily.
Uses
Ideal for most common surfaces around the house, areas this product typically is applied to is; panelling, plasterboard, cove basing, window sills, styrofoam, carpet tack strips, aluminium, steel, wood, concrete, cork, fireplace, and tub surrounds.
- Plastics
- Wood
- Steel
- Aluminium
- Wood
- Styrofoam
- Concrete
- Brick
- Plasterboard
- Carpet
- Metal
- Cork
Preparation
Before the application can begin, you must prepare the surfaces by removing any contaminants that can hinder the adhesion; this includes oil, grease, dirt, dust and similar impurities.
Application
- Remove the cap from the product
- Cut the nozzle at a 45° angle with an opening slightly larger than the gap to be filled
- Squeeze the tube onto one of the two surfaces
- Bring together and firmly support for 24 hours
- Excess sealant needs removal with water before drying
Limitation
Any areas that are totally encapsulated joints will not dry completely, if both surfaces are porous, this product will not work fully. This adhesive won't apply to asphalt, bitumen, external dampness, or fully immersed areas.
