Everbuild Plumbers PVC Pipe Cement - Clear 250ml (Box of 12) 
ALM Code 8 Milled Lead - 360mm x 6m 
Code 4 Cast Lead - 360mm x 3m 
Everbuild Coving Adhesive & Joint Filler - 290ml 
ALM Code 5 Milled Lead - 180mm x 3m 
Everbuild Quick Drying Clear Varnish - Gloss 2.5L 
Code 5 Cast Lead - 914mm x 6m 
ALM Code 4 Milled Lead - 760mm x 6m 
Sika MultiSeal Self Adhesive Bituminous Sealing Tape - Grey (225mm x 10m) 
Easy-Trim Eaves Comb Filler, 1m 
Bond It Drive Alive Tarmac Restorer - 4 Litres 
Ronseal Ultra Tough Satincoat Clear Varnish - 2.5L 
Code 3 Cast Lead - 760mm x 3m 
Bond It Frame-Mate Door & Window Sealant - Brown EU3 
Timco Blue Polypropylene Rope 8mm x 15m 
Thompson's Emergency Roof Seal - Black 1L 
ALM Code 6 Milled Lead Flashing - 760mm x 6m 
Silweld Repair Tape, Black - 3m 
ALM Code 7 Milled Lead - 1000mm x 3m 
Everbuild PVC Hazard Tape - Red/White (50mm x 33m) 
Everbuild Mammoth Clear Weatherproof Tape 
Bond It Economy Sealant Gun - Blue 300ml 
This Squeezy, Solvent-Free Adhesive by Bond It excels at delivering great adhesive results without harming the environment. Irrespective of your experience, this product comes straight from the bottle and can be applied directly easily.
Uses
Ideal for most common surfaces around the house, areas this product typically is applied to is; panelling, plasterboard, cove basing, window sills, styrofoam, carpet tack strips, aluminium, steel, wood, concrete, cork, fireplace, and tub surrounds.
- Plastics
- Wood
- Steel
- Aluminium
- Wood
- Styrofoam
- Concrete
- Brick
- Plasterboard
- Carpet
- Metal
- Cork
Preparation
Before the application can begin, you must prepare the surfaces by removing any contaminants that can hinder the adhesion; this includes oil, grease, dirt, dust and similar impurities.
Application
- Remove the cap from the product
- Cut the nozzle at a 45° angle with an opening slightly larger than the gap to be filled
- Squeeze the tube onto one of the two surfaces
- Bring together and firmly support for 24 hours
- Excess sealant needs removal with water before drying
Limitation
Any areas that are totally encapsulated joints will not dry completely, if both surfaces are porous, this product will not work fully. This adhesive won't apply to asphalt, bitumen, external dampness, or fully immersed areas.
