ALM Code 4 Milled Lead - 1200mm x 3m 
Soudal Trade PU Construction Adhesive - Beige 290ml 
Bond It Aluminium Foil Tape - 75mm x 45M (Box of 16) 
OX Tools Winter Set - Beanie, Socks, Thermal Gloves 
Everbuild EB25 Ultimate Sealant & Adhesive – Anthracite 300ml (Box of 12) 
Siroflex Contractors Lead Sheet Silicone - Grey 300ml 
ALM Code 7 Milled Lead - 850mm x 3m 
OX Pro Jab Saw - 6.5" / 165mm & Holster Pack 
Bond It Paving & Patio Seal - Clear 25L 
Sikabond PVA - White 5 Litre 
Ronseal Anti-Bacterial Worktop Oil - Clear 1L 
Everbuild General Purpose Silicone - Brown 290ml (Box of 12) 
Everbuild 701 Non-Slip Tile Adhesive – White 7.5kg 
Over Fascia Vent, 10mm 
Soudal 5 Minute D4 Wood Adhesive Liquid – 750g (Box of 12) 
Freeflow 112mm Round Union Gutter Bracket - White 
OX Pro Magnetic Level 600mm 
Timloc Underlay Felt Lap Vent (Box of 50) 
OX Pro Mini Square Mouth Shovel 
Everbuild 402 Waterseal – 25 Litre 
OX Pro Tile Nippers 200MM / 8" 
Everbuild Stixall Extreme Power - Black 290ml (Box of 12) 
Siroflex Seal & Fix Hybrid Adhesive & Sealant - Black 290ml 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Brown (Box of 5) 
Kwik Flash Lead Tool - Turn In Setting Tool For Lead & Zinc Flashing 
Siroflex Trade High Viscosity Superglue - 20g 
Timco Nut Mix Grab Pack - 980 Pieces 
Sika 1 Waterproofer – 5 Litre 
Code 5 Cast Lead - 600mm x 3m 
Sika Water Seal & Waterproof Protector - 5 Litre 
The Refined Wood Dye by Colron is the ultimate wood dye choice compared to traditional solvent-based choices on the market. This product is carefully formulated to deliver all the benefits of conventional wood dyes without any discolouration or fading. You can apply this to hardwood or softwood, but it is only suitable for interior wooden furniture.
Preparation
The Refined Wood Dye shouldn't be applied onto previously treated surfaces. You should prepare the surface by removing any previous coating, regardless of what it is: oil, dye, etc. Use a sandpaper to sand down to the bare wood, then wipe any present dust away with a damp, lint-free cloth.
Application
- Shake the tin well for about 1 minute.
- Tip a small amount of the dye into a lint-free cloth or small piece of sponge.
- Apply to the wood, following the direction of the wood grain and working evenly.
- Two coats typically achieve optimal results, but you can apply further coats if you want to continue thickening the colour. You must give 1 hour of drying time between each coat.
- After finishing the application, you can either leave it there or seal it with a dedicated interior lacquer to protect the surface.
Aftercare
Any leftover dye shouldn't be emptied into watercourses or drains; you should contact your local authority to understand how to dispose of it safely. Any cloths or sponges used should be disposed of safely, as they can be flammable after being soaked in dye.
