Code 7 Cast Lead - 1600mm x 3m 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – Clear 300ml 
Everbuild External Frame Sealant - White 290ml (Box of 12) 
ALM Code 6 Milled Lead Flashing - 1600mm x 6m 
Code 3 Cast Lead - 450mm x 3m 
Bond It PVA & Adhesive Sealer - White 5L 
Easy-Trim Ridge F Universal Dry Ridge System - 6m Kit (Pallet of 84 Boxes) 
20 x Easy-Trim Ridge F Universal Dry Ridge System - 6m Kit 
OX Pro Semi Round Dutch Pin, Swivel Arm - 4 Pack 
Ronseal Diamond Hard Floor Wax - Natural 2.5L 
ALM Code 7 Milled Lead - 1000mm x 3m 
Everbuild Forever White Silicone Sealant – 295ml 
Timloc Plain Tile Vent Terracotta (Box of 14) 
Code 8 Cast Lead - 850mm x 3m 
Evo-Stik 528 Instant Contact Adhesive – 5 Litre 
Everbuild Lumberjack 30 Minute PU Wood Adhesive Gel - 310ml (Box of 12) 
Everbuild Black Jack 905 All Weather Roof Coating – 25 Litre 
Code 6 Cast Lead - 300mm x 6m 
Timco Classic Pozi Multi-Purpose Screws - Mixed Tray 
Oxyturbo Oxygen Refill 
Bond It Rain-Mate All Weather Sealant - White EU3 
Soudal Parquet & Timber Sealant - Dark Grey 290ml 
Leadax Lead Free Flashing Alternative 450mm (6M Rolls) 
Soudal Trade Gun Grade Expanding Foam - 750ml (Box of 12) 
Bond It Mould Stop - Clear 2.5L 
ALM Code 3 Milled Lead - 850mm x 6m 
Everbuild Black Jack 908 DPM – 5 Litre 
Code 5 Cast Lead - 600mm x 3m 
Everbuild Professional Sealant Gun – C4 (290 - 380ml) 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Brown (Box of 5) 
Ronseal Stays White Ultra Tough White Matt Paint - 750ML 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, White - 300ml (Box of 12) 
Bostik Brushable Waterproofer - Black 5L 
The Acrypol+ Waterproof Roof Coating by Cromar is an outstanding product that can repair small damages to a roofing system's surface. Applied simply through a brush, it sits on the surface using its unique, fibre-reinforced formula that bridges the gap, sealing it and preventing unwanted leaks. The versatility of this product is excellent, with surfaces suitable for applying to including;
- Asphalt
- Bituminous surfaces
- Brickwork
- Gutters
- Leadwork
- Metals
- PVC
- Asbestos
- Glass
- Roofing Felt
- Roof Lights
- Concrete
- Fibreglass
- Flashings
- Chimney stack
Preparation
Brush the surface with a stiff brush, removing any debris and organic growth. The surface must be sound and after it's been cleaned it can be left damp but not soaking wet.
Application
- Dip the brush into the paint
- Apply it liberally to the surface
- If the surface is damp, apply it in a circular motion to rotate the water out and ensure optimal adhesion
- If the gap is larger than 10mm, fill it with a flexible filler or suitable tape
- Apply your Acrypol+ to the surface, ensuring liberal coverage over the tape or filler
- Coverage will vary depending on the substrate and thickness in which it's applied at
Limitations and Notes
- This product is not suitable for balconies or areas which are trafficked.
- This product should not be used on wooden surfaces, fishponds or interior use.
- Thoroughly read the safety data sheet to ensure that you're informed before applying it.
