Code 7 Cast Lead - 1600mm x 3m 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – Clear 300ml 
Everbuild External Frame Sealant - White 290ml (Box of 12) 
ALM Code 6 Milled Lead Flashing - 1600mm x 6m 
Code 3 Cast Lead - 450mm x 3m 
Bond It PVA & Adhesive Sealer - White 5L 
Easy-Trim Ridge F Universal Dry Ridge System - 6m Kit (Pallet of 84 Boxes) 
20 x Easy-Trim Ridge F Universal Dry Ridge System - 6m Kit 
OX Pro Semi Round Dutch Pin, Swivel Arm - 4 Pack 
Ronseal Diamond Hard Floor Wax - Natural 2.5L 
ALM Code 7 Milled Lead - 1000mm x 3m 
Everbuild Forever White Silicone Sealant – 295ml 
Timloc Plain Tile Vent Terracotta (Box of 14) 
Code 8 Cast Lead - 850mm x 3m 
Evo-Stik 528 Instant Contact Adhesive – 5 Litre 
Everbuild Lumberjack 30 Minute PU Wood Adhesive Gel - 310ml (Box of 12) 
Everbuild Black Jack 905 All Weather Roof Coating – 25 Litre 
Code 6 Cast Lead - 300mm x 6m 
Timco Classic Pozi Multi-Purpose Screws - Mixed Tray 
Oxyturbo Oxygen Refill 
Bond It Rain-Mate All Weather Sealant - White EU3 
Soudal Parquet & Timber Sealant - Dark Grey 290ml 
Leadax Lead Free Flashing Alternative 450mm (6M Rolls) 
Soudal Trade Gun Grade Expanding Foam - 750ml (Box of 12) 
Bond It Mould Stop - Clear 2.5L 
ALM Code 3 Milled Lead - 850mm x 6m 
Everbuild Black Jack 908 DPM – 5 Litre 
Code 5 Cast Lead - 600mm x 3m 
Everbuild Professional Sealant Gun – C4 (290 - 380ml) 
Hambleside Danelaw TV10/6 Flush Fit Tile Vent - Brown (Box of 5) 
Ronseal Stays White Ultra Tough White Matt Paint - 750ML 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, White - 300ml (Box of 12) 
Bostik Brushable Waterproofer - Black 5L 
Everbuild Wood Adhesive 502 – 500ml 
Ronseal Precision Finish Brush - 0.5 Inch 
Soudal Fix ALL Flexi – Grey 290ml (Box of 12) 
OX Pro 5 Piece Wood Chisel Set in Velcro Case 
Uses
This Everbuild All Purpose Ready Mixed Filler is essential for any D.I.Y enthusiast or Tradesman looking to repair various surfaces. This product dries to a smooth but tough, crack-resistant sandable finish, allowing you to perfectly repair a hole to a flush finish. This product is suitable for internal and external use, offering various areas of applications; this product is suitable for surfaces such as;
- Plaster
- Brick
- Wood
- Stone
- Render
Preparation
You must prepare all surfaces correctly to achieve a good key and optimal adhesion. Remove any dust, oil, dirt, grease or similar contaminants, cover any nail or screw heads with oil-based paint and allow to dry.
Application
- Stir well before use and apply directly from the tub into the filling area.
- This product can fill a gap with a maximum depth of 9mm. If you want to fill a more significant depth, apply in layers and allow 1 hour between each layer so it can fully cure.
Limitations
- Do not use to fill plastics or metals.
- This product is unsuitable to be applied when rain is imminent or within 5 hours of application.
- Do not apply in temperatures below 5°C.
- Not suitable for repairs in permanently wet areas
- Do not apply more than 9mm depth per application. (e.g. if the gap is 27mm deep, it will take 3 coats at 9mm depth each with an hour between each one)
