Code 4 Cast Lead - 800mm x 6m 
Ronseal Stays White Ultra Tough White Matt Paint - 2.5L 
Everbuild EuroScrim Plasterboard Tape – 48mm x 90m 
Timco 30mm Cladding Pin - 250 Pieces 
Timco Twin-Threaded Woodscrew Mixed Tray 
Everbuild Lumberjack Wood Preserver – Clear 1 Litre 
FloPlast Square Line Pipe Connector White 
Isoflex Clean Up Fluid - 500ml 
Evo-Stik Tile & Grout Adhesives - White 3kg 
Hambleside Danelaw Double Roman Tile Vent, TV15/3 - Terracotta (Box of 5) 
Hambleside Danelaw (HD PCA) Tile Vent Adaptor for TV10 range 
ALM Code 7 Milled Lead - 180mm x 6m 
Code 7 Cast Lead - 210mm x 3m 
Code 6 Cast Lead - 240mm x 3m 
Ronseal Exterior Yacht Varnish - Satin 250ml 
SEAL PRO, Low Modulus Hybrid Universal Sanitary Sealant & Adhesive Bond, White - EU3 
Timloc Plastic Insulation Retaining Discs - 80mm Red 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
ALM Code 8 Milled Lead - 180mm x 3m 
OX Pro Small Trowel - 200 x 75mm 
OX Tools 600/1200/1800mm Pro Spirit Level Set with Bag 
Bond It Aluminium Foil Tape - 75mm x 45M (Box of 16) 
Everbuild Everflex 200 Contractors LMA Silicone - Brown 295ml 
Soudal Insulating Foam Genius Gun 750ml - Champagne (Box of 12) 
Chesterfelt Polyester Reinforced Shed Roofing Felt - Green 10m x 1m 
Lead Flexi Slate Pipe Flashing - Flat 
Ulti-Mate Stonewold MkII Roof Tile Vent - Brown 
OX Tools Pro Torpedo Level, 9" / 230mm 
Everflex Contract AC95 Intumescent Sealant & Adhesive - White 900ml (Box of 12) 
Uses
The American Duct Tape by Everbuild is a high-quality, powerful adhesive that is strong, thick and entirely waterproof. Its unique composite can adhere to most common substrates and is compatible with both interior and exterior applications. Application this product has been applied in include;
- Wind and waterproofing scaffolding, windows, doors and exposed roofing.
- Applications on vertical and overhead surfaces due to its exceptional bonding strength
- Temporarily hold DPM, guttering, sheet material, timber, or any other construction material to be owned in place without clamps.
Preparation
Surface preparation is vital to achieve optimal results. Clear the surface and clean it, removing any contaminants that can hinder the adhesion, for example, dust, dirt, oil, grease, etc.
Application
- Remove the outer packaging tape
- Peel some of the tape and apply it to the surface
- Unravel the tape and firmly press it into place simultaneously
- Use a knife or scissors or your hands to tear off when finished
Limitations and Notes
- This product should not be used on surfaces that bleed oils or plasticisers
