Soudal Genius Gun Gap Filling Foam - 750ml 
Soudal Soudaduct - Grey 300ml 
OX Pro Chalk Refill, Blue - 226g 
Stanley Heavy-Duty Scraper - 75mm 
Soudal Cartridge Gun Heavy Duty - Black 310ml 
Code 4 Cast Lead - 850mm x 3m 
Ronseal Ultra Tough Mattcoat Clear Varnish - 2.5L 
Soudal Insulating Foam Genius Gun 750ml - Champagne (Box of 12) 
Code 3 Cast Lead - 850mm x 3m 
Siroflex Painters Caulk-It - 310ml 
Everbuild Black Jack 904 Roof Felt Adhesive – 5 Litre 
Freeflow 65mm Square Down Pipe Connector - Black 
Everbuild Anchorset Green 150 - Grey 150ml 
Ronseal Multi Purpose Smooth Finish Filler - 2.2Kg 
Soudal Orange Skeleton Gun - Up to 400ml 
Everbuild Stixall Extreme Power - Brown 290ml (Box of 12) 
Everbuild PVCu Cream Cleaner - 1 Litre 
Code 6 Cast Lead - 914mm x 3m 
Hambleside Danelaw Felt Lap Vent 
Everbuild Pro Fill - Light Grey 500g 
Everbuild Black Jack 908 DPM – 5 Litre 
Everbuild Jumbo Mitre Fast Kit (Box of 6) 
Uses
Everflex Heat-Mate Sealant by Everbuild offers a multitude of applications for industrial uses; it works well as a gasket sealant and can be used for joints and assemblies which must be resistant to high temperatures. These application areas include ducting, metal chimneys, industrial and domestic ovens, and other heat appliances.
Preparations
All surfaces must be prepared before commencing the application. Complete it by removing any contaminants that can hinder the adhesion; these include dust, dirt, oil, grease, old sealant and mastic. Highly porous surfaces such as new plaster should be primed before application.
Application
- Cut the top of the cartridge without damaging the threaded screw.
- Screw the nozzle onto the cartridge, and cut it at a 45° angle with an opening slightly larger than the gap to be filled.
- Apply firm, even pressure to the gun using a standard sealant gun, which will extrude the sealant with an even bead to enhance optimal adhesion.
Limitations
- Do not use on porous surfaces such as brick, concrete and stone
- This product is not suitable in conjunction with lead, bitumen or asphalt
- Do not use soft metals such as lead or brass
- On temperatures above +250°C, slight discolouration may occur, but the integrity of the sealant won't be affected.
- This product is not suitable for above the temperature of 275°C.
