Bostik Fast-Tak Permanent Adhesive - 500ml 
OX Tools Winter Set - Beanie, Socks, Thermal Gloves 
Soudal Butyrub Non-Setting Mastic - Black 300ml 
Timloc Interlocking Plain Tile Vent Grey (Box of 12) 
Cromar Roofing Felt Adhesive - Black 5 Litre 
Soudal Exterior Frame Silicone - Brown 270ml 
Bostik Penetration Primer For Roofs, Black - 5 Litre 
Soudal Soudaduct - Grey 300ml 
OX Tools Diamond Blade Triple Pack 115/22.23mm 
Code 3 Cast Lead - 240mm x 6m 
Everbuild Evercryl One Coat Grey – 20kg 
Timco Screwdriver 8-Tool Set 
Armatool 30m Longo Chalk Line 
Bond It PVCu Solvent Fast Acting Cleaner - Clear 1L 
Everbuild Everflex Contract 700T LMN Silicone - Bronze (Box of 25) 
Ronseal Quick Drying Radiator Spray Paint - White Gloss 400ml 
OX Tools Pro Sharpdraw Snap Off Pencil Replacement Blades - Set of 3 
ALM Code 5 Milled Lead – 650mm x 6m 
Everbuild Jetcem Rapid Repair Cement – 6kg 
Uses
This product has outstanding properties allowing it to be used on various surfaces in various environments. It is suitable for sealing around baths, showers, basins and other sanitary ware, and it can also seal worktops, laminates and aluminium gutter sealing. You can also use this product as an adhesive, and it's excellent for fixing PVCu Trims, cladding and panels together.
Preparation
Before you can begin the application, you must prepare the surfaces. You can achieve this by removing dust, loose flakes, old sealants, grease, oil and other contaminants that can hinder the adhesion. Once you have completed this, make sure you dry the surface, and then you can begin application.
If the application area has a large gap, use an expanding foam or joint backing rod to support the silicone bond. Otherwise, you'll use more silicone sealant than needed to fill the void.
Applications
- Unscrew the top of the cap.
- Cut the nozzle at a 45° angle with an opening slightly larger than the gap to be filled.
- Squeeze the tube, apply even pressure and begin the application.
- Smooth down the sealant within 15 minutes of application, and you can do this by using a spatula or a piece of wood wetted with a soap and water solution.
