Everbuild Quick Drying Clear Varnish - Gloss 250ml 
Everbuild Everflex Contract AC95 Intumescent Sealant & Adhesive - 900ml 
Siroflex Painters Caulk-It - 310ml 
Ronseal 3 in 1 Basecoat - White 2.5L 
Timloc Single Pantile Tile Vent Brown (Box of 11) 
Everbuild 408 Super Seal - 5 Litre 
Everbuild Tecnic Foil Pack Gun 
FrogTape® Multi-Surface Masking Tape - Green 24mm x 41.1m 
Code 4 Cast Lead - 1600mm x 6m 
Soudal Soudaduct - Grey 300ml (Box of 12) 
Roofer Doofer – The Ultimate Roofing Tool 
Everbuild 502 Wood Adhesive – 5 Litre 
Ronseal Wet Rot Wood Hardener - 750ml 
Timloc InvisiWeep Extension Tube - 500mm Clear 
Everbuild Pinkgrip Adhesive Solvent Based - 350ml (Box of 12) 
Timco Mixed Hose Clips 
Everbuild Overlap & Border Adhesive - White 250g 
Everbuild Multi-Use Giant Wonder Wipes Tub (300 Wipes) 
OX Pro 5 Piece Wood Chisel Set in Velcro Case 
Klober 15x9 Tile Vent - Brown KG9690-0247 (Box of 10) 
Bond It Contractors Grade PVA - White 500ml 
Timloc Castellated Tile Vent Grey (Box of 8) 
Bond It The Beast PU Adhesive - Brown 250ml 
Uses
Everflex Heat-Mate Sealant by Everbuild offers a multitude of applications for industrial uses; it works well as a gasket sealant and can be used for joints and assemblies which must be resistant to high temperatures. These application areas include ducting, metal chimneys, industrial and domestic ovens, and other heat appliances.
Preparations
All surfaces must be prepared before commencing the application. Complete it by removing any contaminants that can hinder the adhesion; these include dust, dirt, oil, grease, old sealant and mastic. Highly porous surfaces such as new plaster should be primed before application.
Application
- Cut the top of the cartridge without damaging the threaded screw.
- Screw the nozzle onto the cartridge, and cut it at a 45° angle with an opening slightly larger than the gap to be filled.
- Apply firm, even pressure to the gun using a standard sealant gun, which will extrude the sealant with an even bead to enhance optimal adhesion.
Limitations
- Do not use on porous surfaces such as brick, concrete and stone
- This product is not suitable in conjunction with lead, bitumen or asphalt
- Do not use soft metals such as lead or brass
- On temperatures above +250°C, slight discolouration may occur, but the integrity of the sealant won't be affected.
- This product is not suitable for above the temperature of 275°C.
