Everbuild Black Jack 908 DPM – 5 Litre 
Everbuild Forever Grey Silicone Sealant – 295ml 
Code 3 Cast Lead - 800mm x 3m 
Code 8 Cast Lead - 800mm x 6m 
Everbuild P11 Central Heating System Cleanser – 1 Litre 
ALM Code 5 Milled Lead - 850mm x 6m 
Bond It B3 Fill And Fix Expanding Foam Aerosol - Beige 500ml 
Bond It Aluminium Foil Tape - 100mm x 45M 
Soudal Repair Express Cement – Beige 290ml (Box of 12) 
Everbuild Showerproof Bathroom Silicone – White 280ml 
Code 7 Cast Lead - 1200mm x 6m 
OX Pro Wide Head End Cutting Nippers - 200mm 
ALM Code 4 Milled Lead - 800mm x 6m 
Easy-Trim Lead R Flashing Smooth – 150mm x 5m 
Ronseal Crystal Clear Outdoor Varnish - Satin 2.5L 
Bostik Fast-Tak Permanent Adhesive - 500ml 
Easy-Trim Ridge F Universal Dry Ridge System - 6m Kit 
Ronseal 6 Year Anti Mould Paint - White Matt 750ml 
Ronseal Ultra Tough Hardglaze Clear Varnish - 750ml 
Everbuild Clear Fix – 290ml (Box of 12) 
Bond It Oil Stain Remover - White 1L 
Everbuild Pinkgrip SF But It’s White – 380ml (Box of 12) 
OX TOOLTREK Modular Storage System - 3 Piece 
Everbuild Flue Jointing Compound - 1kg 
Uses
The Lumberjack 30 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 30-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm pressure on the handle, apply the adhesive to one surface, and after applying it, bring the two surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
