Youngman Double Section Roof Ladder 4.89m (57664600) 
Ronseal Stays White One Coat Non-Drip Paint - Satin 750ml 
Code 8 Cast Lead - 450mm x 6m 
Code 6 Cast Lead - 1600mm x 3m 
Soudal Orange Skeleton Gun - Up to 310ml 
Sika Dustproofer – Clear 5 Litre 
Everbuild Overlap & Border Adhesive - White 250g 
Everbuild External Frame Sealant - Brown 290ml (Box of 12) 
Estwing Roofers Pick Smooth Face Hammer - 21oz 
BORA Centipede 2ft x 4ft x 30in Unit - 4 X-Cups + 2 Clamp + C/S Bag 
Bond It Cover-It Hardfloor & Glass Protector - Blue 625mm X 25M 
Everbuild 501 PVA - 5 Litre 
Spax Pozi Pz3 Drill Bits - 25mm (Pack of 5) 
IKO Super Shed Felt - Black 8m Roll 
Everbuild 408 Super Seal - 5 Litre 
ALM Code 5 Milled Lead - 600mm x 3m 
SikaFlex EBT+ Polyurethane Adhesive & Sealant, Grey - 300ml (Box of 12) 
Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml (Box of 25) 
Code 5 Cast Lead - 300mm x 3m 
Everbuild Lumberjack 5 Minute Wood Adhesive Deal 
ALM Code 3 Milled Lead - 850mm x 3m 
OB41 Silicone Lubricant Spray 400ml 
ERidge Dry Fix Ridge System Black – 6m Kit 
Bond It Bath Mate Bath & Kitchen Sealant - White EU3 Box of 25 
Ronseal Diamond Hard Doorstep Paint - Tile Red Satin 750ml 
Siroflex Trade Strength Glass Cleaner - 1L 
Soudal Genius Gun Gap Filling Foam - 750ml 
Uses
The Lumberjack 30 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 30-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm pressure on the handle, apply the adhesive to one surface, and after applying it, bring the two surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
