Code 4 Cast Lead - 210mm x 3m 
Permavent Black Breather Membrane – 1m x 50m 
Code 5 Cast Lead - 390mm x 6m 
OX Trade Plastering Trowel - 11 inch / 280mm 
Bond It B1 Fire Resistant PU Gun Grade Expanding Foam - Pink 750ml 
Ronseal Ultimate Finish Decking Pad Kit 
ALM Code 5 Milled Lead - 180mm x 3m 
ALM Code 7 Milled Lead - 510mm x 6m 
Soudal Insulating Foam Genius Gun 750ml - Champagne 
Ronseal Super Flexible Smooth Finish Filler - 300ml 
ALM Code 6 Milled Lead Flashing - 800mm x 3m 
Klober Double Pantile Vent - Terracotta KG9858-3-0152 (Box of 10) 
Code 3 Cast Lead - 240mm x 6m 
Soudal Trade Roof & Insulation Foam Genius - 600ml 
Permavent Easy Slate 600 - Box of 100 
Gorilla Contact Adhesive Tube - Clear 75g 
Soudal Construction Silicone, Grey - 290ml 
Soudal Decorators Caulk – White 290ml (Box of 24) 
Everbuild Plumbers Gold Sealant – Clear 290ml (Box of 12) 
OX Pro Double Handle Pool Trowel 
Bond It Caulk-Mate One Hour Decorators Caulk - White EU4 
Hambleside Danelaw (HD TVSPA) Tile Vent Adaptor and Flexi for TV15 Range 
Everbuild No Waste Foam – 750ml 
Everbuild 502 Wood Adhesive – 5 Litre 
Soudal Soudafoam Window & Door Gun Grade – 750ml 
Uses
The Lumberjack 30 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 30-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm pressure on the handle, apply the adhesive to one surface, and after applying it, bring the two surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
