Timloc Universal Slate Roof Vent 
Armatool Flooring Kneepads 
Everbuild Glass Protector - Red (600mm x 25m) 
Everbuild Lumberjack 550 Floor Adhesive – Buff 300ml 
Soudal Fix ALL Turbo - White 290ml (Box of 12) 
Silweld Repair Tape, Black - 3m 
ALM Code 4 Milled Lead - 240mm x 6m 
Cromar Vent 3 High Performance Breathable Membrane - 1m x 50m (Full Pallet of 54) 
Bond It Dustproof & Hardener - Clear 5L 
Timloc Over Fascia Vent - 1m 
Everbuild Everflex 200 Contractors LMA Silicone - Black 295ml (Box of 25) 
Everbuild Everflex 225 Industrial & Glazing Silicone - White 295ml (Box of 25) 
Samac Aluminium Clout Nails - 55mm x 3.35mm (1kg) 
Siroflex Trade Strength Glass Cleaner - 1L 
Siroflex Trade High Viscosity Superglue - 20g 
Bond It Bitumen Paint - Black 25L 
Code 7 Cast Lead - 510mm x 3m 
Ronseal uPVC Paint - White Satin 2.5L 
Ronseal Diamond Hard Doorstep Paint - Tile Red Satin 750ml 
Everbuild Everflex 200 Contractors LMA Silicone - White 295ml 
Code 5 Cast Lead - 914mm x 6m 
Soudal Butyrub Non-Setting Mastic - Grey 300ml 
Bond It Expanding Foam Cleaning Fluid - Clear 500ml 
Colron Refined Teak Oil - 500ml 
Cromar Vent 3 High Performance Breathable Membrane - 1m x 50m 
Everbuild Everflex Heat Mate Sealant - Red 295ml 
Uses
The Lumberjack 5 Min PU Wood Adhesive by Everbuild offers outstanding bonding to common building surfaces and wood. Everbuild's technicians formulated this product to deliver a 5-minute curing time, allowing faster application, perfect for line manufacturing. Other manufacturing areas this is perfect for include manufacturing doors and windows, furniture and the construction of staircases and ladders.
Preparation
You should prepare the surface before starting the application, removing any contaminants on the surface, such as dirt, dust, oil, grease, etc. You need at least one surface to be porous; non-porous surfaces should be abraded to provide a key for the adhesive. You can further enhance the adhesion by slightly moistening one surface with a damp cloth; do not over-wet.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw.
- Cut the nozzle at a 45° angle and fit it into a standard sealant gun/applicator.
- Using a firm pressure on the handle, apply the adhesive to one surface, and after applying it, bring the two surfaces together immediately.
Limitations
- One surface must be porous for successful bonding
- Not suitable for polyethylene, polypropylene, Teflon or Nylon.
- Surfaces must be damp, but the moisture content of wood must not exceed 30% w/w
- Only apply this product between the temperature of 5°C to 30°C
- Setting times will be increased at low temperatures and low humidity.
