Soudafoam Gap Filler Genius Gun - 600ml 
Soudal Trade All Weather Sealant - Clear 290ml 
Bond It Decking Oil - Natural 2.5L 
ALM Code 3 Milled Lead - 1600mm x 6m 
OX Trade Plastering Trowel - 11 inch / 280mm 
Soudal Trade Roof & Insulation Foam Genius - 600ml 
Code 8 Cast Lead - 300mm x 3m 
Ronseal Diamond Hard Floor Paint - Anthracite Satin 750ml 
Siroflex Contractors Lead Sheet Silicone - Grey 300ml 
Circular Soffit Vent, Black 
Code 4 Cast Lead - 450mm x 3m 
Ronseal Ultra Tough Mattcoat Clear Varnish - 2.5L 
Everbuild Triple Action Wood Treatment – 1 Litre 
ALM Code 7 Milled Lead - 760mm x 3m 
OX Pro Tough Bucket, Blue - 15 Litre 
Timloc Eaves Comb Filler 1m 
FloPlast Rafter Bracket Top Fix 
Everbuild Industrial Superglue HV – Clear 20g 
Everbuild Everflex Contract AC50 Acoustic Sealant & Adhesive - White 380ml 
Code 6 Cast Lead - 450mm x 3m 
FrogTape® Multi-Surface Masking Tape - Green 24mm x 41.1m 
Spax Phillips Ph1 Drill Bits - 25mm (Pack of 5) 
OX Pro Impact Drill & Drive Accessory Set - 40 Piece 
Klober Dry Ridge System, 6m (KR5200) 
Bond It Mould Stop - Clear 1L 
Restec Flexitec 2020 Roofing Kit - (10m²) 
Ronseal Ultra Tough Hardglaze Clear Varnish - 250ml 
OX Tools Drywall Rasp 250mm 
Ronseal One Coat Damp Seal - White 750ml 
Everbuild Everflex Contract AC50 Acoustic Sealant & Adhesive - White 900ml 
Everbuild Opti-Mix Mortar Plasticiser – 1 Litre 
Uses
The Silicone Spray by Everbuild is an excellent, high-quality lubrication product that seamlessly releases locked surfaces, eliminating unwanted noises and squeaks. It's a non-stick colourless formula, so there are no concerns about unsightly stains occurring during the application. Applications that this product is typically used in include;
- As a general high-quality lubricant spray
- A multitude of applications in mould-making and releasing industries
- Making installing EPDM gaskets to windows and door frames seamless
- Restoring black gloss finish to car vinyl rim, removing the need for polishing
Application
- Shake the can thoroughly
- Spray as required directly onto the surface(s) to be lubricated
- If it's a mould, spray liberally onto the mould and allow it to dry
Limitations and Notes
- Do not ingest this product
- Do not pierce or burn even after use
- Do not spray on a naked flame or incandescent material
- Store in a pressurised container, protect from sunlight and do not expose to temperatures above 50°C
