FloPlast Half Round Running Outlet, Brown 
Everbuild Lumberjack 30 Minute PU Wood Adhesive Gel - 310ml (Box of 12) 
Code 7 Cast Lead - 210mm x 6m 
Everbuild Everflex Mirror Mate Adhesive - White 290ml (Box of 12) 
Timco FirmaHold Collated Brad A2 Stainless Steel Nails - 16G x 38mm (2000 Pieces) 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Slate Grey (Box of 5) 
ALM Code 4 Milled Lead - 760mm x 3m 
Klober Double Roman Roof Tile Vent - Terracotta KG9857-3-0152 (Box of 10) 
Soudal Construction Silicone, Grey - 290ml 
ALM Code 3 Milled Lead - 760mm x 6m 
Ronseal Ultra Tough Hardglaze Clear Varnish - 250ml 
Code 5 Cast Lead - 1600mm x 6m 
Ronseal Exterior Yacht Varnish - Gloss 500ml 
ALM Code 8 Milled Lead - 760mm x 6m 
Ronseal Quick Drying Smooth Finish Filler - 330g 
Easy-Trim Universal Dry Verge System - Terracotta 
Soudal Soudatherm Roof 250 - 800ml (Box of 12) 
Everbuild Stixall Extreme Power - White 290ml (Box of 12) 
Timco Assorted Horseshoe Shims - 1.0 to 6.0mm (Box of 200) 
Code 6 Cast Lead - 240mm x 3m 
Bond It SBR Admixture - White 2.5L 
Bond It PVA & Adhesive Sealer - White 1L 
Everbuild Everflex 115 G.P Building Mastic - Stone 285ml (Box of 25) 
Bond It Cyanoacrylate Superglue Medium Viscosity, Clear - 20g 
Code 8 Cast Lead - 390mm x 3m 
Leadax Lead Free Flashing Alternative 250mm (6m rolls) 
ALM Code 6 Milled Lead Flashing - 850mm x 6m 
OX Tools Pro Heavy Duty Flexi Tub - 42L 
ALM Code 5 Milled Lead - 914mm x 3m 
Oxyturbo Oxygen Refill 
Everbuild Stick2 Superglue De-Bonder - 20ml 
Soudal Insulating Foam Genius Gun 750ml - Champagne (Box of 12) 
The Stixall Extreme Power by Everbuild is the ultimate bonding product, perfect for adhesion and sealing, making the versatility of this product unmatched. Due to its unique, high-quality formula, the surfaces and applications of this product are endless, with surfaces suitable for applications such as;
- Metals
- Most Plastics
- Glass
- Concrete
- Plaster
- Plasterboard
- Polyester
- Perspex
- Wood
- Enamel
- Painted surface
- Plus more!
Preparation
With correct preparation, you can achieve optimal results, so it's essential to complete it first before completing the application. To prepare the surface, remove any small debris and clean the area, ensuring no contaminants are present, such as dirt, dust, grease, etc, which can interfere with the adhesion. After removing any impurities, dry the surface, and once it's completely dry, you can start the application.
Application
- Cut the top of the cartridge to the required width, ensuring you do not damage the threaded screw.
- Screw the nozzle onto the top of the cartridge, and fit the cartridge into a standard applicator tool/gun.
- Apply the tip of the gun to the area, apply a firm, even pressure and continue it until you've finished; avoid stopping and starting. You should use a zig-zag motion for adhesive application and, for sealing or pointing applications, a continuous bead along the gap.
Limitations
- You should complete preliminary tests with paints before completing the whole application, as certain paints are unsuitable.
- If the application is overhead and heavy applications, mechanical fixings should be used to support the adhesive.
- Discolouration may occur after prolonged exposure to high UV. However, this doesn't affect the adhesive properties.
- If the application area is predominately dark, you may experience yellowing.
- This product is not suitable for glazing systems or aquarium manufacturing.
- Do not use on surfaces that bleed oils or plasticizers, and it is also unsuitable for application with bitumen or asphalt.
- Certified as a sealant for internal use only.
