Everbuild Everflex 225 Industrial & Glazing Silicone - White 295ml (Box of 25) 
Colron Liquid Scratch Cover - Light 14ml 
Ronseal Ultra Tough Mattcoat Clear Varnish - 2.5L 
Ronseal Wet Rot Wood Hardener - 250ml 
Klober Profile-Line Adaptor & Flexipipe - KG979100 / KG979900 
Bond It Gripbond Pro Max Adhesive - White EU3 
ALM Code 5 Milled Lead - 450mm x 3m 
Ronseal One Coat All Surface Primer and Undercoat - White 250ml 
IKO Super Shed Felt - Green 8m Roll 
OX Pro OX-P133855 Easy Start Handsaw 550mm / 22in 
Everbuild KOS Fire Cement Buff – 500g 
Ronseal Expanding Foam Filler - 500ml 
Hambleside Danelaw TV15/1 Flush Fitting Tile Vent - Black (Box of 5) 
Cromar Vent 3 Classic Breathable Membrane - 1m x 50m 
Timco Collated Drywall Self Drilling Screws 
Siroflex Seal & Fix Hybrid Adhesive & Sealant - Black 290ml 
Everbuild Lumberjack 550 Floor Adhesive – Buff 300ml (Box of 12) 
Sika 1 Waterproofer – 5 Litre 
Everbuild Overlap & Border Adhesive - White 250g 
Hambleside Danelaw MONO6+ Dry Fix Ventilated Mono Ridge System 6m 
Everflex Contract 125 One Hour Caulk, Brown - 300ml (Box of 25) 
Timloc Castellated Tile Vent Grey (Box of 8) 
Timco Chalk Line Set 
Ronseal Expanding Foam Filler - 300ml 
Code 5 Cast Lead - 914mm x 6m 
Everbuild XT44 Maintenance Spray - 400ml 
Code 3 Cast Lead - 760mm x 3m 
Soudal Soudafoam Hand Held One Shot - 150ml 
Code 6 Cast Lead - 300mm x 6m 
OB41 Cut Tap Drill Fluid - 400ml 
OX Trade Hard Green Carpenters Pencils – Pack of 10 
Everbuild Clear Fix – 290ml (Box of 12) 
Uses
The Triple Action Wood Treatment by Everbuild is the ultimate wood-treating product on the market. It is crafted to cater to both wood treatment and preservation in one can, using a low-odour solution based on micro-fine technology with added fungicides, algaecides and permethrin. This formula actively combats wood rot, decay, and kills fungi and wood-boring insects. The applications areas this product is typically applied include;
- Sheds and garages
- Fencing and farm buildings
- Roof beams and joists
- Garden furniture
- Floorboards
- Window frames and doors
Preparation
Prepare the application area by ensuring that it's clean and free from paint varnish, stain, grease, bark or other impurities. You can apply this product to a damp surface. Any decay present must be removed and replaced with a sound, treated timber.
Application
- Shake well before use.
- Apply by using either a brush, spray or dipping.
- After the first coat has dried, you should apply a second,
- It is important to pay attention and to soak the end grains thoroughly; for optimal protection, dip it for at least 3 minutes.
Limitations
- Do not dilute this product, as it is ready to use
- This should not be applied to surfaces that food is prepared on
- Avoid contact with bitumen, roofing felt or plastics
- External timbers must be overcoated to reduce environmental impact
- You should use coarse rather than fine mist generators
- This should only be used as specified, as a surface biocide and wood preservative.
