Armatool Flooring Kneepads 
Everbuild 5 Minute Polyurethane Wood Adhesive Gel - 310ml (Box of 12) 
Freeflow 65mm Square Gutter Drain Pipe 112° Branch - White 
OX TOOLTREK Modular Storage System - 3 Piece 
Bostik Flashband Self Adhesive Flashing Tape – Grey 3.75m x 75mm 
Timloc Plain Tile Vent Red (Box of 14) 
FloPlast Half Round Gutter 90° Bend, Brown – 112mm 
Soudal Lead Sheet Sealant 290ml - Grey (Box of 12) 
Everbuild Bath & Kitchen Sealant - 200ml 
ALM Code 8 Milled Lead - 300mm x 6m 
Samac Half Round Snowguard Bracket - 225mm (9") 
Bond It Rain-Mate All Weather Sealant - Clear EU3 
Everbuild Everflex 200 Contractors LMA Silicone - Transparent 295ml (Box of 25) 
OX Pro Mortar Spike, 300mm 
Soudal Vaseline Lubricating & Protective Spray – 400ml 
FloPlast Downpipe Rainwater Diverter Kit RVS1 
ALM Code 5 Milled Lead - 150mm x 3m 
Code 8 Cast Lead - 760mm x 6m 
Everbuild Resiblock Trade – Clear 5 Litre 
Everbuild PVCu Acti-Spray – Clear 200ml 
Ronseal One Coat Water-Based Tile Paint - Granite Grey Satin 750ml 
ALM Code 4 Milled Lead - 300mm x 6m 
Bond It Cove-Mate Coving Adhesive - White EU3 
Bond It Superglue Activator Accelerator Spray Cyanoacrylate Aerosol - 400ml 
Estwing Hammer Curved Claw Smooth Face - 20oz 
Soudal Orange Skeleton Gun - Up to 400ml 
Timco 8 Spanner Set 
Code 6 Cast Lead - 450mm x 3m 
Ronseal Stays White Ultra Tough White Satin Paint - 2.5L 
Uses
The Triple Action Wood Treatment by Everbuild is the ultimate wood-treating product on the market. It is crafted to cater to both wood treatment and preservation simultaneously, using a low-odour solution based on micro-fine technology with added fungicides, algaecides and Permethrin. This formula actively combats wet rot, dry rot, and kills fungi and wood-boring insects. The applications areas this product is typically applied include;
- Sheds and garages
- Fencing and farm buildings
- Roof beams and joists
- Garden furniture
- Floorboards
- Window frames and doors
Preparation
Prepare the application area by ensuring that it's clean and free from paint varnish, stain, grease, bark or other impurities. You can apply this product to a damp surface. Any decay present must be removed and replaced with a sound, treated timber.
Application
- Shake well before use.
- Apply by using either a brush, spray or dipping.
- After the first coat has dried, you should apply a second,
- It is important to pay attention and to soak the end grains thoroughly; for optimal protection, dip the end grains for at least 3 minutes.
Limitations
- Do not dilute this product, as it is ready to use
- This should not be applied to surfaces that food is prepared on
- Avoid contact with bitumen, roofing felt or plastics
- External timbers must be overcoated to reduce environmental impact
- You should use coarse rather than fine mist generators
- This should only be used as specified, as a surface biocide and wood preservative.
