ALM Code 4 Milled Lead - 760mm x 3m 
BOND IT Power Mix Concentrated Liquid Mortar Plasticiser - 500ml Brown 
FloPlast Round 92½° Bend - White 
Evo-Stik Gripfill Gap Filling Adhesive – 350ml 
Everbuild Multi-Stick Adhesive - White 350ml 
Timco Glazing Shovel - 260mm 
FloPlast Round Line Downpipe Clip, Black 
Bond It B2 Expanding PU Foam - Beige 750ml 
Soudal Genius Gun Building Adhesive 750ml - Champagne 
Soudal B1 Fire Class Expanding Foam Handheld - 750ml (Box of 12) 
Bond It Mould Stop - Clear 1L 
Soudal 140 LQ Contact Adhesive – 5 Litre 
Bond It Aluminium Foil Tape - 75mm x 45M (Box of 16) 
Easy-Trim Universal Dry Verge System Black (Pallet of 400) 
Soudal PU Plasterboard Adhesive - Genius Gun 
Ronseal One Coat Blackboard Paint - Black 250ml 
Bond It 5 Minute PU Wood Gel Translucent 300ml - Box of 12 
OB41 Electrical Contact Cleaner - 400ml 
ALM Code 8 Milled Lead - 1000mm x 6m 
Bond It Multi-Purpose Low Viscosity Spray Lubricant - 400ml Clear 
Soudal Neutral Stay Fresh Sanitary Silicone Sealant – Clear 300ml (Box of 12) 
Code 6 Cast Lead - 850mm x 3m 
Code 5 Cast Lead - 450mm x 6m 
Freeflow 68mm Round Gutter Drain Pipe 112° Branch - White 
Bond It Bitumen Primer - Black 2.5L 
Sika Stone Protector - Clear 5 Litre 
Lead Flexi Slate Pipe Flashing - Flat 
ALM Code 3 Milled Lead - 600mm x 3m 
Everbuild Safer Spirit - 750ml 
Soudal Manual Foil Pack Gun Aluminium, 600ml (Sealant Gun for Sausages) 
Uses
The EVO-STIK Stick Like Sh*t delivers outstanding grab and adhesive performance while resisting various weather conditions and temperatures. This single-component SM Polymer adhesive provides superior bonding strength and adheres firmly to impervious surfaces.
It has excellent water-resisting properties alongside weatherproofing, making it ideal for internal and external applications. It's resistant to extreme temperatures, from as low as -40°C all the way up to +100°C. Compatible for adhering to, including;
- Wood
- Metal
- Glass
- Stone
- Plastics
- Polystyrene
- Concrete
- Tiles
- Mirrors
- Plasterboard
Preparation
Before starting the application, prepare all surfaces to ensure optimal bonding and results. Start by cleaning all surfaces and removing contaminants that can hinder the adhesion, including dirt, dust, grease, oil, loose material, etc. You can apply this to damp surfaces, but care for flaking debris that may be hard to notice.
Application
- Cut the top of the cartridge, taking care not to damage the threaded screw
- Cut the nozzle at 45° to the desired width and screw it onto the cartridge
- Place the product into a suitable adhesive applicator tool
- Apply parallel beads of adhesive to one of the surfaces and bring them together within 10 minutes of application
- Beads at 5mm are sufficient; for tighter fittings, the bead may be reduced to 3mm
- If the distance between the beads is by at least 200mm, you should apply a perimeter bead for added strength
Limitations and Notes
- Do not apply this product to surfaces contaminated by bitumen
- Uncured product can be used with a cloth dampened in white spirit
- This product will not bond to Polyethylene, Polypropylene or Tefon
- This product is excellent water-resistant but cannot be immersed in water
- If the mirror is backed with a safety film, do not use this product
- If bonding a mirror, ensure it's not a painted surface, as it affects the adhesive strength.
