Evercryl Emergency Roof Repair - Clear 310ml 
ALM Code 4 Milled Lead - 850mm x 3m 
Ronseal Exterior Yacht Varnish - Gloss 250ml 
Ronseal Stays White One Coat Non-Drip Paint - Matt 2.5L 
OX Pro 6 Piece Bricklayers Set 
Ronseal Knot Block Primer & Undercoat - White 2.5L 
Bond It Mould Stop - Clear 2.5L 
FloPlast Half Round Downpipe 112° Bend, White 
OX Pro 20oz Forged Steel Hatchet 
Everbuild Pinkgrip SF But It’s White – 380ml (Box of 12) 
Bond It Dec-Mate Flexible Filler - Magnolia EU3 
Bond It B3 Fill And Fix Expanding Foam Aerosol - Beige 750ml 
Everbuild Opti-Mix Mortar Plasticiser - 1 Litre (Box of 12) 
Ronseal Interior Varnish - Clear Gloss 2.5L 
Cromar Roof Felt Adhesive - Black 1 Litre 
Roofer Doofer – The Ultimate Roofing Tool 
OX Tools Drywall Rasp 250mm 
Ronseal Kitchen & Bathroom Repair Kit 
Ronseal Multi Purpose Powder Smooth Finish Filler - 500g + 50% 
ALM Code 7 Milled Lead - 210mm x 6m 
Ronseal Wet Rot Wood Hardener - 250ml 
FloPlast Round 92½° Bend - Black 
Ronseal Precision Finish Brush - 0.5 Inch 
Everbuild Lumberjack 550 Floor Adhesive – 600ml (Box of 12) 
Sika Patio Seal – 5 Litre 
Timco Hazard Tape 
Uses
The Anti-Condensation Paint by Ronseal is a high-quality, uniquely formulated paint that completely controls condensation, mould, and general damp issues. This paint, when applied, delivers an added layer of insulation, protecting the paint and your wall from unsightly damage. This type of paint is suitable for scrubbing down when cleaning, making it perfect for bathrooms and kitchens.
Preparation
Before commencing the application, you should prepare the surface. Clean it down to remove any contaminants, and if the surface has mould present, use a dedicated mould killer to remove it. You should not sand it away; all this does is spread the pores, which causes it to spread.
Application
- When opening the tin, thoroughly stir it to mix all the pigments.
- Apply the paint directly to the wall using a brush or roller, ensuring you don't spread it too thinly.
- Allow 4 hours for the first coat to dry, then apply a second. The surface will be touch dry in 2 hours but suitable for painting over in 4 hours.
Aftercare
This paint can be used as a top coat or undercoat; if an undercoat is your intention, you should wait 4 hours for it to dry before applying it. Any leftover paint on tools should be removed and cleaned using warm, soapy water.
