ALM Code 8 Milled Lead - 600mm x 3m 
Code 6 Cast Lead - 600mm x 3m 
Soudal Pro 40P PU Wood Adhesive - 750g 
Everbuild 404 Fungicidal Wash – 5 Litre 
Soudal Mitre Kit 50g + 200ml - Clear (Box of 12) 
Youngman Spacemaker Loft Ladder (30234000) 
Timco Lithium EP2 Grease - 400g 
Hambleside Danelaw Felt Lap Vent 
Cromar Bitumen Primer – Black 2.5 Litre 
Everbuild Bath & Kitchen Sealant – White 290ml 
Everbuild Everflex Mirror Mate Adhesive - White 290ml (Box of 12) 
Isoflex Clean Up Fluid - 500ml 
Bond It Bath Mate Bath & Kitchen Sealant - White EU3 Box of 25 
Bond It Caulk-Mate One Hour Decorators Caulk - White EU4 
Siroflex Trade Hand Held PU Expanding Foam 
OX Pro Heavy Duty Aviation Snips Straight Cut (Yellow) 
Soudal Handheld Gap Filler Expanding Foam - Champagne 750ml (Box of 12) 
Code 8 Cast Lead - 850mm x 6m 
Bond It FG8 Food Grade Silicone - White 310ml 
Everbuild Everflex Contract 125 One Hour Caulk – White 380ml 
Uses
The Exterior Multi-Purpose Smooth Finish Filler by Ronseal is a perfect gap-filling product for exterior applications. With excellent weathering resistance, including frost and water, this product also delivers durability and robustness, offering long-lasting application. Delivered in a ready-to-use tub, you can easily apply this product, and it dries within a couple of hours, perfect for a quick job to do on the weekend.
Preparation
Before starting the application, clean the surface thoroughly, removing any contaminants that can hinder the adhesion.
Application
- Apply the filler directly into the gap, pressing firmly, ensuring it reaches all corners of the void. You should apply enough filler so it fills the gap and slightly protrudes out.
- Before the filler dries, smooth it out using a wet knife.
- The drying time is about 1-2 hours; wait patiently, and then you can redecorate on top of it.
- If you want to fill a gap more significant than 20mm, you'll need to apply the filler into the void at 20mm at a time, let it cure and dry, and then apply another 20mm until the void is entirely filled.
Aftercare
Remove as much of the product from any tools; anything left over can be cleaned with warm, soapy water.
