BORA - PM-4550 Adjustable Speedhorse XT 
Gorilla Wood Glue - Brown 1L 
Circular Soffit Vent, White 
Soudal B2 Fire Rated Expanding Foam Gun Grade - 750ml 
Soudal Fix ALL Turbo - White 290ml (Box of 12) 
Timloc Eaves Comb Filler 1m 
Everbuild Salt-Away Sprayable Salt Remover – 1 Litre 
Silweld Repair Tape, Black - 3m 
Soudal Fix ALL Flexi – White 290ml (Box of 12) 
Code 5 Cast Lead - 240mm x 6m 
FloPlast Half Round Stop End Outlet, White – 112mm 
Bond It PVCu Solvent Fast Acting Cleaner - Clear 1L 
OX Trade XL Cuts All Tiles Diamond Blade 
Cromar Bitumen Trowel Mastic - Black 2.5L 
FrogTape® Delicate Surface Masking Tape - Yellow 36mm x 41.1m 
Thompsons One Coat Roof Seal - Black 5L 
Everbuild Seal Rite Strip / Smooth Out Twin Pack 
Everbuild Showerproof Bathroom Silicone – White 280ml (Box of 12) 
Code 7 Cast Lead - 360mm x 3m 
Bond It Stabilizing Solution - White 5L 
Uses
The Kitchen & Bathroom Touch-Up Enamel by Ronseal delivers fantastic repairs for your delicate ceramic, porcelain, acrylic and fibreglass surfaces. This product is simple and quick to use, allowing even the most novice of D.I.Yer to repair their surfaces effectively.
Preparation
Lightly sand the affected area, cleaning it afterwards, using a damp cloth, and removing all contaminants that can interfere with the product.
Application
- Thoroughly shake the bottle for several minutes before using it.
- Brush the first coat onto the area.
- Allow it to dry for two hours. After drying, apply another coat or two, giving two hours of drying time between them.
- After you've applied the final coat, allow it 24 hours before getting it wet. The surface will be touch-dry after an hour, but wait four days before submerging it in water.
Aftercare
Once it's dried, you can clean it how you would normally. Clean the area and apply another coat if you notice any further chips or scratches.
