Soudal Soudafoam Hand Held One Shot - 150ml 
Code 4 Cast Lead - 180mm x 3m 
Bond It Barrier Tape Yellow and Black - 70mm x 500M 
Soudal Trade PU Construction Adhesive - Beige 290ml 
ALM Code 6 Milled Lead Flashing - 210mm x 6m 
ALM Code 4 Milled Lead - 210mm x 6m 
Code 7 Cast Lead - 1600mm x 3m 
Code 8 Cast Lead - 600mm x 3m 
Siroflex Trade Strength Glass Cleaner - 1L 
Hambleside Danelaw Double Plain Tile Vent, TV10/9 - Slate Grey (Box of 5) 
Soudal Glass and Mirror Cleaner - 1 Litre 
FloPlast Half Round Stop End Outlet, Brown – 112mm 
Soudal 5 Minute D4 Wood Adhesive Liquid – 750g 
Everbuild Lumberjack 30 Minute Polyurethane Wood Adhesive Liquid – 750ml 
Gorilla Heavy Duty Mounting Tape - Crystal Clear (25mm x 1.5m) 
Code 6 Cast Lead - 1600mm x 3m 
Ronseal One Coat Stays White Radiator Paint - Matt 750ml 
ALM Code 8 Milled Lead - 450mm x 6m 
Everbuild Everflex Pyro Mate Fire Rated Silicone – White 295ml 
Bond It B2 Expanding PU Gun Grade Foam - Beige 750ml 
Code 3 Cast Lead - 360mm x 6m 
Everbuild Pinkgrip SF But It’s White – 380ml (Box of 12) 
Everbuild Everflex Contract AC50 Acoustic Sealant & Adhesive - White 380ml 
Weather Guard Poly-Tarpaulin 
Ronseal Precision Finish Brush - 2.5 Inch 
Uses
The Quick Drying Smooth Finish Filler by Ronseal is the go-to filler for a smooth, quick finish. It's perfect for the home D.I.Yer looking to make a quick repair in a short amount of time. With no experience required, you can pick this product, apply it and sit back, wait 30 minutes, and it's complete, no call out and no tradesperson needed. The surfaces that you can apply this product onto include the following;
- Interior wood
- Interior Stone
- Interior Concrete
- Plaster
Preparation
Prepare the surface by ensuring it's clean, removing dirt, dust and other contaminants that can hinder this product's adhesion.
Application
- Get the filler and push it directly into the hole, filling the hole entirely and leaving it raised slightly to ensure you've filled it correctly.
- Using a wet knife, whilst the filler is still wet, smooth it down, leaving a flush, professional finish.
- Please note you can fill gaps larger than 10mm. You need to apply the first load of 10mm into the hole, wait for it to dry, and repeat until the whole is filled.
Aftercare
Once the filler is dried, you can paint or decorate it as you like. Any tools that have the filler on them can be cleaned with warm, soapy water.
