Soudal PU Plasterboard Adhesive - Genius Gun 
FloPlast Half Round To Cast Iron Half Round Gutter Adaptor - Black 
Soudal Trade PU Construction Adhesive - Beige 290ml 
Code 6 Cast Lead - 1200mm x 3m 
Everbuild Stick2 Hard Plastic Adhesive - 30ml 
Bond It Felt Adhesive - Black 2.5L 
ALM Code 7 Milled Lead - 1600mm x 3m 
Soudal Repair Express Cement – Grey 900ml 
Everbuild Easi-Squeeze Flexible Decorators Filler - White 200ml 
Everbuild Firefoam B1 Gun Grade Expanding Foam - Pink 750ml 
OB41 Silicone Lubricant Spray 400ml 
Everbuild External Frame Sealant - Brown 290ml (Box of 12) 
Everbuild Pinkgrip SF But It’s White – 380ml 
Permavent Easy Slate 500 - Box of 100 
FloPlast Square Line Downpipe Clip White 
Lead Sheet Restorer - G3 
Everbuild Plumbers PVC Pipe Cement - Clear 250ml 
Everbuild Wood Filler Hardener / Catalyst - 40g 
Soudal Genius Gun Building Adhesive 750ml - Champagne (Box of 12) 
Timloc 1205 Underfloor Vent Horizontal Duct Adapter - 110mm 
Bond It Heavy Duty Gun Foam Applicator 
Bond It Felt Adhesive - Black 5L 
Ronseal Fence Life Brush - 4" 
Soudal Insulating Foam Genius Gun 750ml - Champagne (Box of 12) 
Uses
The Genius Gun Plasterboard Adhesive by Soudal is forged to provide effective adhesive. It is stored in a small and economical 600ml aerosol can with a unique Genius Gun attachment, which allows the user to apply the adhesive directly from the can. The patented Genius Gun head by Soudal enables multiple uses, with it viable for up to 6 weeks after its first use. This adhesive is suitable for horizontal and vertical use, with its superior bonding strength holding insulation boards effortlessly.
Preparation
Before commencing the application, you should prepare the surface to ensure the optimal adhesive is achieved. Start by removing any dirt, dust, grease, oil, talcum, organic growth, etc. If any bubbles, cement slurries and sinter layers are present, you must remove them before starting the application.
Application
- Equip protective goggles and gloves and shake the can thoroughly for at least 20 seconds.
- Open the cover, folding the tube perpendicular to the aerosol can
- As you proceed with completing the application, regularly shake the can, ensuring its composite is constantly mixed
- Apply the adhesive to one of the panels you intend to bond
- Bring the surfaces together and apply pressure, allowing the adhesive to cure and bond the surfaces
Limitations and Notes
- After using the product, you must ensure that the valve is cleared of all foam and cleaned to make it reusable.
