Everbuild Everflex Fire Mate Intumescent Sealant – 295ml 
Code 4 Cast Lead - 240mm x 3m 
Code 3 Cast Lead - 450mm x 3m 
Klober Double Roman Roof Tile Vent - Terracotta KG9857-3-0152 (Box of 10) 
Timloc Single Pantile Tile Vent Red (Box of 11) 
Lead Roofing Wood Core Roll (50mm x 2.4m) 
ALM Code 8 Milled Lead - 510mm x 6m 
Bond It Gripbond - Solvent-Free Adhesive - White 350ml 
Ronseal Exterior Multi-Purpose Smooth Finish Filler - Grey 1.2Kg 
Everbuild P18 Gas Leak Detector - 400ml 
Everbuild Caulk Once – White 380ml (Box of 12) 
Everbuild 402 Waterseal – 25 Litre 
Code 7 Cast Lead - 360mm x 6m 
Everbuild Firefoam B1 Gun Grade Expanding Foam - Pink 750ml (Box of 12) 
OX Trade Tile Cleaner 120 x 250mm 
Roughneck® V-Series Axe - 20oz/0.6kg 
ALM Code 7 Milled Lead - 600mm x 3m 
Samac Aluminium Clout Nails - 50mm x 3.35mm 10kg Box 
Code 8 Cast Lead - 450mm x 3m 
Ronseal uPVC Paint - White Satin 2.5L 
Everbuild Stixall Extreme Power - Black 290ml (Box of 12) 
Uses
The Trade Expanding Foam by Soudal is the ultimate general-purpose expanding foam for tradespeople or DIYers. It offers outstanding filling capacity, with the most common surface suitable for adhering. With its fantastic acoustic and thermal properties, its value as an expanding foam outweighs competitors. It can be used internally and externally but is typically applied during the installation of windows, filling in voids and sealing openings in roof constructions.
Preparation
Due to the nature of the expanding foam, it doesn't require too much preparation. However, good practice would be to take a stiff brush and sweep the surfaces, removing any small debris present. Any organic growth should be eradicated using a fungicide, and any oil, grease, dirt, dust, etc, should be removed.
Application
- Shake the can thoroughly for at least 20 seconds.
- Securely fit the nozzle to the can and hold it upside down to apply
- Slightly moisten the surface with a water sprayer to enhance the curing speeds.
- Hold the can upside down and fill 1/3 of the void, allowing the expanding foam to fill the rest.
- If you require another layer, allow the first to dry, slightly moisten the surface and apply a second load of expanding foam.
Limitations and Notes
- Any cured expanding foam will have to be mechanically removed.
- Any uncured expanding foam can be cleaned away using a damp cloth.
- Moisten the surface to enhance the curing speed.
