OX Pro 7 Piece Screwdriver Set 
Bulk Pallet 50 Packs of Aluminium Clout Nails, 50 x 3.35 - 10KG (500kg) 
Code 5 Cast Lead - 240mm x 3m 
Oxyturbo Oxygen Refill 
Everbuild Black Jack 904 Roof Felt Adhesive – 1 Litre 
Everbuild Firefoam B1 Gun Grade Expanding Foam - Pink 750ml (Box of 12) 
Soudal 30 Minute Bond D4 PU Wood Adhesive Liquid – 750g (Box of 12) 
Easy-Trim Lead R Flashing Smooth – 150mm x 5m 
Timco High Visibility Wet Paint Tape 
Klober Boll Roll Tile Vent KG6085, Brown 
Easy-Trim Eaves Comb Filler, 1m 
Patination Oil Lead Mate Flashing Protection Coating - 500ML 
Everbuild Firefoam B2 Gun Grade - Pink 750ml 
Soudal Repair Express Cement – Grey 900ml 
Everbuild KOS Fire Cement Buff – 2kg 
Code 3 Cast Lead - 1200mm x 3m 
SEAL PRO, Low Modulus Hybrid Universal Sanitary Sealant & Adhesive Bond, White - EU3 
OX Tools OXIT Sealant & Adhesive - Clear 290ml (Box of 12) 
Everbuild Lead Mate Patination Oil – 1 Litre 
Ronseal Hairline Crack Ready Mix Wall Filler - White 330g 
Soudafoam Gap Filler Gun Grade – 750ml 
Everbuild Tarmac Restorer - 5 Litre 
Spax Pozi Pz2 Drill Bits - 25mm (Pack of 5) 
Uses
The Window & Door Kit by Soudal is the ultimate general-purpose expanding foam for tradespeople or DIYers. It offers outstanding filling capacity, with the most common surface suitable for adhering. With its fantastic acoustic and thermal properties, its value as an expanding foam outweighs competitors. It can be used internally and externally but is typically applied during the installation of windows, filling in voids and sealing openings in roof constructions.
Preparation
Due to the nature of the expanding foam, it doesn't require too much preparation. However, good practice would be to take a stiff brush and sweep the surfaces, removing any small debris present. Any organic growth should be eradicated using a fungicide, and any oil, grease, dirt, dust, etc, should be removed.
Application
- Shake the can thoroughly for at least 20 seconds.
- Fit the gun on the adaptor of your chosen PU Gun applicator.
- Slightly moisten the surface with a water sprayer to enhance the curing speeds.
- Hold the can upside down and fill 65% of the void, allowing the expanding foam to fill the rest.
- If you require another layer, allow the first to dry, slightly moisten the surface and apply a second load of expanding foam.
Limitations and Notes
- Any cured expanding foam will have to be mechanically removed.
- Any uncured expanding foam can be cleaned away using a damp cloth.
- Moisten the surface to enhance the curing speed.
