Siroflex Seal & Fix Hybrid Adhesive 
Everbuild One Strike Filler - White 450ml 
8 x Cromar Vent 3 Pro Breathable Membrane 1m x 50m 
Code 3 Cast Lead - 1000mm x 3m 
FloPlast Square Line Shoe White – 65mm 
Bond It Aerosol Spray Adhesive 500ml Beige - Box of 12 
Gorilla Glue - Dark Brown 60ml 
Bond It Decking Oil - Natural 5L 
Code 8 Cast Lead - 1000mm x 3m 
Thompson's Patio & Block Paving Anti-Slip Additive - 200g 
Everbuild 503 SBR Bond – 2.5 Litre 
Sikabond PVA - White 5 Litre 
Bostik Builder Tape, 50mm - 25m 
Everbuild Multi-Purpose Wood Filler - 250ml Dark Oak 
ALM Code 7 Milled Lead - 360mm x 6m 
FloPlast Half Round Running Outlet, Black 
Bulk Pallet 50 Packs of Aluminium Clout Nails, 50 x 3.35 - 10KG (500kg) 
Sika AnchorFix®-1 Fast Cure Anchoring Adhesive System - Light Grey 300ml 
Everbuild Power Pro Sealant Gun - C4 (290ml - 400ml) 
Everbuild Everflex Mirror Mate Adhesive - White 290ml 
OX Pro Chalk Refill, Yellow – 226g 
Everbuild Tecnic Silicone 825 – Brown 380ml (Box of 25) 
Hambleside Danelaw Single Pantile Roof Tile Vent, TV10/8 - Brown (Box of 5) 
Everbuild Mitre Fast Industrial Kit Superglue & Activator 
Thompson's Patio & Block Paving Seal - Natural 5L 
Uses
The Quick Drying Drive Seal from Thompson's offers excellent rejuvenation to your tarmac, restoring it to its former glory! Thompson's crafted this product with a thick, black, low-sheen finish, composite of acrylic polymers, inorganic pigments and fillers in aqueous solutions. It is what allows this product to be so effective, offering outstanding resistance to unsightly oil & fuel stains.
Preparation
Prepare the tarmac by giving it a thorough scrub with a stiff, bristly brush, and this is to remove any dirt or organic growth. You can always apply a dedicated cleaner to the tarmac before eradicating any unwanted contamination. Fill holes with fresh tarmac or a cold cure tarmac if needed. Afterwards, rinse off all cleaning products and ensure the surface is dry before commencing the application.
Application
Please note that the drying times will vary depending on the environmental conditions.
- Give the tin a thorough stir before using it.
- Use a long pile roller and tray for the application.
- Pour the paint into the roller tray and fully load it onto the roller itself.
- Apply directly onto the surface, noting where you've applied it to avoid re-coating the same area before thoroughly drying.
- Ensure you keep stirring the paint to ensure it's consistently mixed.
- Wait 4 hours before applying a second coat.
Limitations
- Do not apply this product if it's raining or forecasted to rain.
- Oil and petrol spills should be removed as soon as possible with warm water.
- Allow new tarmac 90 days to fully dry before applying this product.
- Protect from frost.
